it's the screen backlight ribbon cable clamp

you're screwed pretty bad

That sucks dood, you shouldn't mess around with things you don't know.

Doesn't matter..... I got an idea I'm gonna use sellotape to keep it in place *easy fix*

(16/09/2010 01:42 PM)bsanehi Wrote:  Doesn't matter..... I got an idea I'm gonna use sellotape to keep it in place *easy fix*

use electrical tape T_T

sellotape is static city

also means you'll never be able to disassemble again without breaking something else on the board (unless you're biblically careful)

(16/09/2010 01:49 PM)ProperBritish Wrote:  

(16/09/2010 01:42 PM)bsanehi Wrote:  Doesn't matter..... I got an idea I'm gonna use sellotape to keep it in place *easy fix*

use electrical tape T_T

sellotape is static city

also means you'll never be able to disassemble again without breaking something else on the board (unless you're biblically careful)

Wait a minute you can buy them>?>? but its for psp 1000

http://www.alibaba.com/product-gs/337616..._Clip.html


Edit:

I found it.... here you can buy it....

http://www.sw-box.com/Backlight-Socket-P...-Ndsl.html

But I'm not sure how I'm gonna install this...

(16/09/2010 02:06 PM)xero1 Wrote:  

(16/09/2010 01:50 PM)bsanehi Wrote:  http://www.sw-box.com/Backlight-Socket-P...-Ndsl.html

But I'm not sure how I'm gonna install this...

If you've never done any soldering, my guess is your not. If so don't start with this, you will fudge it up.

Try to find someone with the skills to do this for you.

I just got another idea.... I'm gonna buy this and then try to take out the rubber bit.... i might have to break it and .... fit it in to my one... because i don't think the with plastic bit is broken on my psp.

If that doesn't work I'm gonna have to go to a repair shop with the part and my mobo.....

Because that's way tooo small to solder even with skills....

(16/09/2010 02:12 PM)bsanehi Wrote:  

(16/09/2010 02:06 PM)xero1 Wrote:  

(16/09/2010 01:50 PM)bsanehi Wrote:  http://www.sw-box.com/Backlight-Socket-P...-Ndsl.html

But I'm not sure how I'm gonna install this...

If you've never done any soldering, my guess is your not. If so don't start with this, you will fudge it up.

Try to find someone with the skills to do this for you.

I just got another idea.... I'm gonna buy this and then try to take out the rubber bit.... i might have to break it and .... fit it in to my one... because i don't think the with plastic bit is broken on my psp.

If that doesn't work I'm gonna have to go to a repair shop with the part and my mobo.....

Because that's way tooo small to solder even with skills....

no, people have soldered smaller

i know people who can solder 100-pin EEPROM chips

and before you try, you cannot remove that tiny bit without breaking it in some way, its too fragile.

(16/09/2010 04:07 PM)ProperBritish Wrote:  

(16/09/2010 02:12 PM)bsanehi Wrote:  

(16/09/2010 02:06 PM)xero1 Wrote:  

(16/09/2010 01:50 PM)bsanehi Wrote:  http://www.sw-box.com/Backlight-Socket-P...-Ndsl.html

But I'm not sure how I'm gonna install this...

If you've never done any soldering, my guess is your not. If so don't start with this, you will fudge it up.

Try to find someone with the skills to do this for you.

I just got another idea.... I'm gonna buy this and then try to take out the rubber bit.... i might have to break it and .... fit it in to my one... because i don't think the with plastic bit is broken on my psp.

If that doesn't work I'm gonna have to go to a repair shop with the part and my mobo.....

Because that's way tooo small to solder even with skills....

no, people have soldered smaller

i know people who can solder 100-pin EEPROM chips

and before you try, you cannot remove that tiny bit without breaking it in some way, its too fragile.

Yeah I'm just going to buy two ..... for 7.50 euro.

And I'm gonna mess around with one..... and see if i can fix it myself.... if i fail... i will bring the second one to the repair shop.....

Thank You all for comments. and good night.