Post Reply 
PRX Offsets 5.00M33 discussion
yay! :D
Author Message
Vegetano1
$urf

Posts: 9,083.2507
Threads: 397
Joined: 2nd Mar 2007
Reputation: 6.06988
E-Pigs: 2756.6280
Offline
Post: #261
RE: PRX Offsets 5.00M33 discussion
Super Sheep Wrote:
Vegetano1 Wrote:
Super Sheep Wrote:
Super Sheep Wrote:How does the axis locations on PSP work?

Is the top left corner (0, 0)?

Nevermind I figured it out. If my calculations are anything to be believed then subcions should be (-130, 0) or very close to it.

:) yes that's well known fact,. if you look at the page data of the topmenu_plugin.rco with rcoedit you will see xlist is also set to -130, 0 if you change the y -130 in the prx you also have to chnage the y in the rco,..

tested alot of 0's,. ;)

	
0x00017FA8: 0xAFA00004 '....' - sw         $zr, 4($sp)
	
0x00017FAC: 0x3C01C302 '...<' - lui        $at, 0xC302
	
0x00017FB0: 0x44810000 '...D' - mtc1       $at, $fcr0

;)

i have no clue whot you mean by that,. Flatterd
did you fiind the y for sub icons,. O_o?


Make loads of $$!! it wurks!!
[Image: csbanner_anim_03.gif]
Signed Homebrew by bsanehi & OMightyBuggy
http://endlessparadigm.com/forum/showthr...?tid=25707
Spoiler for My miniBlog:
03/11/2008 03:04 PM
Visit this user's website Find all posts by this user Quote this message in a reply
Vegetano1
$urf

Posts: 9,083.2507
Threads: 397
Joined: 2nd Mar 2007
Reputation: 6.06988
E-Pigs: 2756.6280
Offline
Post: #262
RE: PRX Offsets 5.00M33 discussion
Nothingface420 Wrote:
Vegetano1 Wrote:
Nothingface420 Wrote:
Vegetano1 Wrote:finally found new line shadow offsets,.
PAF:
00006e8    16    y size shadow line
00006D8     -2    y position shadow line  set to 0 center's shadow to line

whot do these offsets do,. well depending on your background selected tracks or picture's ,. etc ,. are hard to read,. now you can add a bar behind the tracks,.:
set the y size to 35 and y position to -1,. but 0 is fine because i moved the text beneath line down,..
use a 16x8 bmp mid grey with white alpha channel.(shadow icons always have white alpha channel,. in the rgb channel use black for nothing to show and white to show all,. so mid grey will be fine)
[Image: f_screen1m_e224c0d.png]

scrambled paf still got alot of offsets to test,. but if you look to the scrambled commonGui you could test all commongui offsets in 1 day,..

That worked great, nice find

I did notice that when your in Account Management it doesn't work, it does the same thing in your FF theme.
[Image: snap000-3.jpg]
Is there a way to make it work for that also?

thanks! i don't have wifi,. maybe you can check in PAF or psn_plugin.prx for 16 and change to 36 see if anything changes!?

i also don't know about Skype, Internet radio, RSS etc because i don't have wifi can't test these

I changed all 16's to 36 in the paf.prx & none of them changed the line shadow in Account Management.
also there were no 16's in the psn_plugin.prx at all.
If you have any other ideas on what to try let me know & I'll test them.

could you try out this prx:

.rar  store_browser_plugin.rar (Size: 107.22 KB / Downloads: 139)

i have already changed all 16's,. so if it works could you see wich 16 works,. there were like 10 16's in this prx,.


Make loads of $$!! it wurks!!
[Image: csbanner_anim_03.gif]
Signed Homebrew by bsanehi & OMightyBuggy
http://endlessparadigm.com/forum/showthr...?tid=25707
Spoiler for My miniBlog:
(This post was last modified: 03/11/2008 03:13 PM by Vegetano1.)
03/11/2008 03:13 PM
Visit this user's website Find all posts by this user Quote this message in a reply
Super Sheep
Teh VSH Haxxor

Posts: 72.3716
Threads: 4
Joined: 26th Aug 2007
Reputation: 1.62242
E-Pigs: 1.5578
Offline
Post: #263
RE: PRX Offsets 5.00M33 discussion
Vegetano1 Wrote:
Super Sheep Wrote:
Vegetano1 Wrote:
Super Sheep Wrote:
Super Sheep Wrote:How does the axis locations on PSP work?

Is the top left corner (0, 0)?

Nevermind I figured it out. If my calculations are anything to be believed then subcions should be (-130, 0) or very close to it.

:) yes that's well known fact,. if you look at the page data of the topmenu_plugin.rco with rcoedit you will see xlist is also set to -130, 0 if you change the y -130 in the prx you also have to chnage the y in the rco,..

tested alot of 0's,. ;)

	
0x00017FA8: 0xAFA00004 '....' - sw         $zr, 4($sp)
	
0x00017FAC: 0x3C01C302 '...<' - lui        $at, 0xC302
	
0x00017FB0: 0x44810000 '...D' - mtc1       $at, $fcr0

;)

i have no clue whot you mean by that,. Flatterd
did you fiind the y for sub icons,. O_o?

Perhaps, it needs further testing.
03/11/2008 03:49 PM
Find all posts by this user Quote this message in a reply
Vegetano1
$urf

Posts: 9,083.2507
Threads: 397
Joined: 2nd Mar 2007
Reputation: 6.06988
E-Pigs: 2756.6280
Offline
Post: #264
RE: PRX Offsets 5.00M33 discussion
i am on a break,. stopped testing,. Ahhyes

hex-workshop crashed today with a whole list of new paf bookmarks,. i have updated almost all bookmark lists and added alot of new ones for 500.

i have't been able to get scramble plugin to work and i tested all offsets with scrambler and scrambler gui,. ;p lol

there is alot of new ones to be found in the visualizer prx(eg the 3rd viz and the 6th viz) and if you start at the beginning of the commonGui prx you could test all descrambled offsets in 1 day,. some descrambled float lists are very short.

about the y sub icons,. i don't think its there,.... is that posible,.?


Make loads of $$!! it wurks!!
[Image: csbanner_anim_03.gif]
Signed Homebrew by bsanehi & OMightyBuggy
http://endlessparadigm.com/forum/showthr...?tid=25707
Spoiler for My miniBlog:
03/11/2008 03:59 PM
Visit this user's website Find all posts by this user Quote this message in a reply
Nothingface420
Forum Ghost

Posts: 333.2874
Threads: 61
Joined: 4th Jun 2008
Reputation: 4.649
E-Pigs: 18.0348
Offline
Post: #265
RE: PRX Offsets 5.00M33 discussion
Vegetano1 Wrote:could you try out this prx:


i have already changed all 16's,. so if it works could you see wich 16 works,. there were like 10 16's in this prx,.

that didn't do it either

[Image: 8.png]
03/11/2008 07:58 PM
Find all posts by this user Quote this message in a reply
Vegetano1
$urf

Posts: 9,083.2507
Threads: 397
Joined: 2nd Mar 2007
Reputation: 6.06988
E-Pigs: 2756.6280
Offline
Post: #266
RE: PRX Offsets 5.00M33 discussion
Nothingface420 Wrote:
Vegetano1 Wrote:could you try out this prx:


i have already changed all 16's,. so if it works could you see wich 16 works,. there were like 10 16's in this prx,.

that didn't do it either

grr,.!! maybe the content_browser.prx,..!?

Knock-knock


Make loads of $$!! it wurks!!
[Image: csbanner_anim_03.gif]
Signed Homebrew by bsanehi & OMightyBuggy
http://endlessparadigm.com/forum/showthr...?tid=25707
Spoiler for My miniBlog:
03/11/2008 08:08 PM
Visit this user's website Find all posts by this user Quote this message in a reply
Nothingface420
Forum Ghost

Posts: 333.2874
Threads: 61
Joined: 4th Jun 2008
Reputation: 4.649
E-Pigs: 18.0348
Offline
Post: #267
RE: PRX Offsets 5.00M33 discussion
Vegetano1 Wrote:
Nothingface420 Wrote:
Vegetano1 Wrote:could you try out this prx:


i have already changed all 16's,. so if it works could you see wich 16 works,. there were like 10 16's in this prx,.

that didn't do it either

grr,.!! maybe the content_browser.prx,..!?

Knock-knock

lol, nope no 16's in the content_browser.prx

oh well I'm going to work on my theme, if you think of anything else let me know & I'll test it.

also I like the scrolling on your Sonic theme, is that smooth scrolling like in this guide? http://endlessparadigm.com/forum/showthr...p?tid=6633
If never done it, but I'm sure I can do it.

[Image: 8.png]
03/11/2008 09:14 PM
Find all posts by this user Quote this message in a reply
Vegetano1
$urf

Posts: 9,083.2507
Threads: 397
Joined: 2nd Mar 2007
Reputation: 6.06988
E-Pigs: 2756.6280
Offline
Post: #268
RE: PRX Offsets 5.00M33 discussion
Nothingface420 Wrote:
Vegetano1 Wrote:
Nothingface420 Wrote:
Vegetano1 Wrote:could you try out this prx:


i have already changed all 16's,. so if it works could you see wich 16 works,. there were like 10 16's in this prx,.

that didn't do it either

grr,.!! maybe the content_browser.prx,..!?

Knock-knock

lol, nope no 16's in the content_browser.prx

oh well I'm going to work on my theme, if you think of anything else let me know & I'll test it.

also I like the scrolling on your Sonic theme, is that smooth scrolling like in this guide? http://endlessparadigm.com/forum/showthr...p?tid=6633
If never done it, but I'm sure I can do it.

grrr !!?!>?#$#@$$ anyway should be somewhere,. ;p

for smoothscroll just do a 200 replace in Content_browser.prx, music_browser.prx, photo_browser.prx, msvideo_plugin.prx, game_plugin.prx and savedata_plugin.prx,..

for other prx files is not really needed,.


Make loads of $$!! it wurks!!
[Image: csbanner_anim_03.gif]
Signed Homebrew by bsanehi & OMightyBuggy
http://endlessparadigm.com/forum/showthr...?tid=25707
Spoiler for My miniBlog:
03/11/2008 10:43 PM
Visit this user's website Find all posts by this user Quote this message in a reply
bastien0812
Paradigmatic Apprentice

Posts: 29.1838
Threads: 1
Joined: 20th Mar 2008
Reputation: 0
E-Pigs: 0.6520
Offline
Post: #269
RE: PRX Offsets 5.00M33 discussion
Quote:did you fiind the y for sub icons,. O_o?
I have search
I have not found 0 value on the vshmain.prx and in the paf.prx i have found 5 value with 0, i have replace all by 90 and they have change nothing Sadist

mabye the y postion sub icons is 1 or -1

I am french so...
04/11/2008 08:26 AM
Find all posts by this user Quote this message in a reply
Super Sheep
Teh VSH Haxxor

Posts: 72.3716
Threads: 4
Joined: 26th Aug 2007
Reputation: 1.62242
E-Pigs: 1.5578
Offline
Post: #270
RE: PRX Offsets 5.00M33 discussion
bastien0812 Wrote:
Quote:did you fiind the y for sub icons,. O_o?
I have search
I have not found 0 value on the vshmain.prx and in the paf.prx i have found 5 value with 0, i have replace all by 90 and they have change nothing Sadist

mabye the y postion sub icons is 1 or -1

It's zero.

In the vshmain assembly, there is sw $zr 4($sp) calls near the -130 values. I just need to find some space in the vshmain to add my own opcodes. Then I can test further.
04/11/2008 09:53 AM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 6 Guest(s)

 Quick Theme: