Threaded Mode | Linear Mode

Calo · 15/04/2007 06:50 PM

3.30oe-A Installation

Tips:

If you have cf previously installed on your 1.5 or anything like that, you can still upgrade without cleaning the flash out. Also you should restore your psp back to default settings. And format your memorystick beforehand.

3.30oe can only be installed from firmware 1.5 or any other version of OE.

----------------------

Downloads:

3.30oe-A Full Install (Alternative Mirror)
Installer\Extractor for 1.5

3.30oe-A Full Install (Alternative Mirror)
Installer\Extractor for SE or OE

----------------------

Miscellaneous Downloads:

Recovery for Semi-Brick or for Going Back to 1.5.

UMD to ISO Dumper

PSX Converter by Zingaburga

----------------------
Instructions for installing 3.30 OE-A:

1. Double click extractor(or you can open it with winrar), extract to memorystick.

2. Run the flasher("3.30 OE-A Firmware Install"). If your battery is less than 75%,
    the program will show an error saying the battery is to low and it will return to the
    XMB.

3. If you have enough battery, the program will continue and will show an
    agreement. Press X to accept it and it will flash the custom firmware to your psp.
    Do not turn psp off or take memorystick out while flashing is in progress.

4.  After finishing flashing, your psp will reboot to XMB and you should now be
     running 3.30OE.

5. If you want to go back to 1.5, or you semi-brick your psp, use the recovery
    download at the top, it has brief instructions on how to use it, included.

6. Read the info which comes with download for any problems please as it has
    everything you need & it lists changes. Also read this great guide by Exad. Tutorial.

----------------------

History
----
3.10oe-a

3.03oe-c

----------------------

All thanks go to the wonderful Dark_Alex for creating this great firmware. :)

Threaded Mode \| Linear Mode 3.30 OE-A Installation Noob Proof
Author	Message