Well its Christmas and my mom agreed to buy a part for my computer. I'm deciding on upgrading my memory since I'm getting a hard drive from my cousin.

Now I know some of the things about what's already in there. I just don't know which one to choose on newegg. Can someone point me out in the right direction? I want to max the memory out (2GB total, 1GB each bank).

Here's what PC Wizard shows:

Quote:General Information :

A0 (RAS 0) :

256 (Single Bank)
A1 (RAS 2) :

256 (Single Bank)

Information SPD EEPROM (A0) :

Manufacturer :

Elpida
Part Number :

EBD25UC8AJFA-6B    
Serial Number :

62002F42
Type :

DDR-SDRAM PC-2700 (166 MHz)  -  [DDR-333]
Size :

256 MB (1 rows, 4 banks)
Module Buffered :

No
Module Registered :

No
Module SLi Ready (EPP) :

No
Width :

64-bit
Error Correction Capability :

No
Max. Burst Length :

8
Refresh :

Reduced (.5x)7.8 µs, Self Refresh
Voltage :

SSTL 2.5v
Prefetch Buffer :

2-bit
Manufacture :

Week 28 of 2003
Supported Frequencies :

133 MHz, 166 MHz
CAS Latency (tCL) :

2 clocks @133 MHz, 2.5 clocks @166 MHz
RAS to CAS (tRCD) :

3 clocks @133 MHz, 3 clocks @166 MHz
RAS Precharge (tRP) :

3 clocks @133 MHz, 3 clocks @166 MHz
Cycle Time (tRAS) :

6 clocks @133 MHz, 7 clocks @166 MHz

Information SPD EEPROM (A1) :

Manufacturer :

Elpida
Part Number :

EBD25UC8AKFA-6B    
Serial Number :

71003891
Type :

DDR-SDRAM PC-2700 (166 MHz)  -  [DDR-333]
Size :

256 MB (1 rows, 4 banks)
Module Buffered :

No
Module Registered :

No
Module SLi Ready (EPP) :

No
Width :

64-bit
Error Correction Capability :

No
Max. Burst Length :

8
Refresh :

Reduced (.5x)7.8 µs, Self Refresh
Voltage :

SSTL 2.5v
Prefetch Buffer :

2-bit
Manufacture :

Week 34 of 2003
Supported Frequencies :

133 MHz, 166 MHz
CAS Latency (tCL) :

2 clocks @133 MHz, 2.5 clocks @166 MHz
RAS to CAS (tRCD) :

3 clocks @133 MHz, 3 clocks @166 MHz
RAS Precharge (tRP) :

3 clocks @133 MHz, 3 clocks @166 MHz
Cycle Time (tRAS) :

6 clocks @133 MHz, 7 clocks @166 MHz

Memory Controller Information :

Memory Controller :

Standard, EDO
Number of connectors :

2
Max. Module Size :

32 MB
Max. Memory Size :

64 MB
Supported Speed :

70ns, 60ns
Supported Voltages :

5v
Error Detection Method :

No
Error Correction Capability :

None
Current/Supported Interleave :

4-way/1-way

Thanks to whoever helps.

-DC

EDIT: I did a search for this... Am I heading in the right direction? By the way, does dual channel sticks work on single channel ones?

http://www.newegg.com/Product/ProductList....alue=524%3A7860