Threaded Mode | Linear Mode

Vegetano1 · 30/09/2007 04:50 PM

bstronga Wrote:by the way i have madsoul's silk dream ready for 3.71M33 just waiting for fixed cxmb with paf/vshmain support.

GIMME GIMME!!

;P

diego · 01/10/2007 04:12 AM

GIME TOO!

MaDc0w · 01/10/2007 04:46 AM

bstronga Wrote:use rcoedits extract all function.
delete everything except .mig files
rename .mig to .dat (because rcoedit will insert .dat file as it is otherwise it'll compress them)
replace all with rcoedit.
check ZiNgA BuRgA's thread about the rco format todo the necessary compression flag changes.

by the way i have madsoul's silk dream ready for 3.71M33 just waiting for fixed cxmb with paf/vshmain support.

I can`t find ZB`s thread. Can someone point me in the right direction?

diego · 01/10/2007 04:57 AM

uhh. . .wondering . . .now woth 1.50kernel, can you flash using recovery now? or can I use a homebrew like usbsss? or do I still have to use Pandora?

ZiNgA BuRgA · 01/10/2007 05:00 AM

Here: http://endlessparadigm.com/forum/showthread.php?tid=231

It's quite complex, so to summarize it, you'll need to start at 0x11E. The value there should be 0x01 - change it to 0x00. Now add 0x38 to 0x11E, go to that offset, change the value from 0x01 to 0x00. Continue by adding 0x38 again to the last offset and changing the value. Keep doing this until you've done it for all the images (eg, if there's 10 images in the RCO, you'll have to do the above procedure 10 times).

It's lengthy, yes, but bstronga is known to not mind doing repetitive tasks :P
I'll see if I can hack up an RCO Editor which won't automatically compress things.

MaDc0w · 01/10/2007 05:07 AM

diego Wrote:uhh. . .wondering . . .now woth 1.50kernel, can you flash using recovery now? or can I use a homebrew like usbsss? or do I still have to use Pandora?

So far ALL my changes are WORKING in recovery and recovery(xmb) in flash0 with no corruption.

I also am using uncompressed paf.prx and vshmain.prx which both work.
(haven`t tried recompressing yet)

Thanks ZB, A rcoedit update would be awesome!

ZiNgA BuRgA · 01/10/2007 05:11 AM

Here's a quick hack to disable compression, and automatically unset the compression flag. Note that it only does this when you replace an icon, so basically, you'll need to extract all, then replace using this hacked RCO Editor. Needs to be placed in the same folder as the normal RCO Editor.
I haven't tested this yet, so tell me if it works.
Also, I've made one or two changes since v1.14d, but I kinda forgot what exactly, so there may be introduced bugs.

Help this helps (By the way, uncompressed topmenu_icon.rco is like 609KB)

diego · 01/10/2007 05:17 AM

MaDc0w Wrote:
diego Wrote:uhh. . .wondering . . .now woth 1.50kernel, can you flash using recovery now? or can I use a homebrew like usbsss? or do I still have to use Pandora?

So far ALL my changes are WORKING in recovery and recovery(xmb) in flash0 with no corruption.

I also am using uncompressed paf.prx and vshmain.prx which both work.
(haven`t tried recompressing yet)

Thanks ZB, A rcoedit update would be awesome!

SO flash acces in Recovery mode of 3.71 m33 (with 1.5kernel add on ) WORKS!!!!!!!!!!! YESSSSSSSSSSSSS!!!!!!!!! :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi: :yipi:

.:ʕΘЯg@nʔ:.™ · 01/10/2007 05:19 AM

sweet testing now :)

diego · 01/10/2007 05:21 AM

please post results . . . *crosses-fingers*

Threaded Mode \| Linear Mode About 3.71M33 Customization with example theme
Author	Message