After messing with the opening_plugin.prx I managed to get my bootsound working again.

1. Open your 3.52 opening_plugin.prx with your hex editor.

2. Mark offsets 42AC to 66436 (hex) and copy it.

3. Decrypt an opening_plugin.prx from 3.71 with prxdecrypter 1.7.

4. Open the 3.71 opening_plugin.prx with your hex editor.

5. Mark offsets 3D94 to FE74 and paste what you copied from the 3.52 opening_plugin.prx.

6. Using the extended pandora boot menu rename the original opening_plugin.prx to opening_plugin.pr (for safety reasons)

7. Copy over your edited opening_plugin.prx and reboot.

8. Enjoy your bootsound.


I don't know if anyone has found this yet, sorry if I double posted.

(This post was last modified: 01/10/2007 04:31 AM by MaDc0w.)

or you could just upload the rco & prx that works & people can mod that ..

hint hint

Your wish is my command. :P

http://www.sendspace.com/file/2szugw

Theres no rco, bootsound is only in the prx now.

I'm using my 3.52 opening rco and so far it works as it is.

cool will test now :)

so you have to hex the sound in then .

Well if you wanted to make new sounds and add them you just follow the same guides as for 3.52

Just the offsets where they are injected changed in 3.7x

I use this Tutorial for making sounds.
http://forums.maxconsole.net/showthread.php?t=70204

Just you CAN'T use CSR to make a 3.71 opening_plugin.prx only 3.52 ones

(This post was last modified: 30/09/2007 10:33 AM by MaDc0w.)

Hey MaDcOw

I tried to make my own ,.. did not work
Your upload works in cxmb 2.5 for 3.71m33 2,.
Could you try and update this 3.52m33 opening sound to 3.71m33 for me,.!?
http://www.sendspace.com/file/cnqe6j

(This post was last modified: 30/09/2007 10:59 AM by Vegetano1.)

Vegetano1 Wrote:Hey MaDcOw

I tried to make my own ,.. did not work
Your upload works in cxmb 2.5 for 3.71m33 2,.
Could you try and update this 3.52m33 opening sound to 3.71m33 for me,.!?
http://www.sendspace.com/file/cnqe6j

Yup I made a boo boo.

Sometimes it didn`t work

The correct starting offset should be 42AC and not 42A4

Heres your working file :)
http://www.sendspace.com/file/ulkpl1

MaDc0w Wrote:

Vegetano1 Wrote:Hey MaDcOw

I tried to make my own ,.. did not work
Your upload works in cxmb 2.5 for 3.71m33 2,.
Could you try and update this 3.52m33 opening sound to 3.71m33 for me,.!?
http://www.sendspace.com/file/cnqe6j

Yup I made a boo boo.

Sometimes it didn`t work

The correct starting offset should be 42AC and not 42A4

Heres your working file :)
http://www.sendspace.com/file/ulkpl1

:angel: thanks i really did try but it did not look good in hexedit and when i saved and tried the opening prx i did not work,..