Post Reply 
Ye PC of Build 1 is dying
oh noes. (PC Build 6?)
Author Message
ZiNgA BuRgA
Smart Alternative

Posts: 17,023.4213
Threads: 1,174
Joined: 19th Jan 2007
Reputation: -1.71391
E-Pigs: 446.0333
Offline
Post: #11
RE: Ye PC of Build 1 is dying
Also, I'm not sure if you can figure out how to force it to freeze in the BIOS, but if you can, disconnect everything but the bare essentials and see if the issue still occurs.
That is, unplug everything from the motherboard except power, CPU+HSF, one stick of RAM and GPU (if you don't have integrated graphics available).  The only things that should be plugged into the computer would be power, keyboard and monitor.
28/04/2014 01:39 AM
Visit this user's website Find all posts by this user Quote this message in a reply
Syfe
Blackened Rose Hero.

Posts: 3,612.4889
Threads: 77
Joined: 4th May 2007
Reputation: -5.01013
E-Pigs: 54.0003
Offline
Post: #12
RE: Ye PC of Build 1 is dying
i was going to pull it apart and test that. although i had a look in the bios first and...

[Image: 20140428_1824471_zps2876e7e2.jpg]

that 3.3v section of the PSU seems very low, could that be causing the shutdowns and such?

wait i get 3.1v in windows, also I cleaned out the GPU with an air can and havent seen any issue just yet. will try to keep an eye on it

just ran some known high graphics pushing games to test out the stableness of the system... besides from the 62c max heat (i dunno how long it stayed this high but it didnt shut off on me)

Rip Signature.
[Image: sig.gif]
(This post was last modified: 28/04/2014 10:14 PM by Syfe.)
28/04/2014 06:19 PM
Find all posts by this user Quote this message in a reply
Syfe
Blackened Rose Hero.

Posts: 3,612.4889
Threads: 77
Joined: 4th May 2007
Reputation: -5.01013
E-Pigs: 54.0003
Offline
Post: #13
RE: Ye PC of Build 1 is dying
so after multiple tests, i havent had an issue with the system.

although I'm going ahead with part replacement on the PSU and Graphics card. even though both work fine right now, i just want to clean up the interior of my PC and increase airflow

so I'm thinking on the lines of these: (once again using Mem Express as they are local)
http://www.memoryexpress.com/Products/MX50785
http://www.memoryexpress.com/Products/MX26068

Rip Signature.
[Image: sig.gif]
(This post was last modified: 30/04/2014 12:31 AM by Syfe.)
30/04/2014 12:27 AM
Find all posts by this user Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

 Quick Theme: