Threaded Mode | Linear Mode

flofrucht · 11/03/2011 10:36 AM

Because some guys asked me about a TUT how to install 6.20 TN-D Permanent Patch on every PSP, I made one.

Works on PSP 1000, 2000v2

BRICK RISK!! 2000v3, 3000, 4000 or PSPgo!

DO THIS AT YOUR OWN RISK, IF YOUR BRICK YOUR PSP GO IT WILL BE DEAD.

I tested it by myself on a PSPgo with 6.20TN-D.

For this, you will need:
- PSP 1000, 2000, 3000, 4000 or PSPgo
-6.20 TN-D
-6.20 TN-D Permanent Patch Pack

Tutorial

1.Copy the 620TND_PPATCH folder to ms0:/ or ef0: /PSP / GAME.

2.Disable [Protect Flash0] in the VSH Menu (Press "SELECT")
[Image: 6-20-tn-hes3la.jpg]

3.Launch 6.20TN-D Permanent Patch.
[Image: 2011030918f1we.jpg]

4.Press x to continue.
[Image: 20110309182y4p.jpg]

5.The original flash0: / vsh / module / vshmain.prx was now backed up to ms0:/ or ef0: / vshorig.prx.
[Image: 20110309187xv2.jpg]

Keep this file for safety reasons, if you'll have a brick you can use that file to recover your psp!

6.Press x again to launch the 6.20 TN-D Permanent Patch in Test mode.

7.Launch the installer again, press x and then o.

8.The patch was now completely installed and the flash0: / vsh / module / vshorig.prx was renamed to [B]vshmain.prx!

Now you stay permanently on 6.20 TN-D!

Deinstallation:

Launch the installer again and deinstall the Patch.

Problem-solving:

There are two recovery combinations:

-while starting the PSP hold R1, this will disable all plugins and set the settings to standard!
-while starting the PSP hold o + x + SELECT + START, this will restore the vshorig.prx that you have backed up!

IF YOU LIKED IT, REP ME ;=)

-flofrucht

Vegetano1 · 11/03/2011 10:46 AM

Nice tut but you should add that people should do this add there own risk,.. just because you tested this on a PSP-Go doesn't mean other people can't brick there PSP-Go,.

there are reports people got bricked PSP-Go's!!

i for one would nvr try this,. knowing there is a possibility to brick my PSP-Go ;)

if you have a brick you have a brick,.... your PSP-Go will be dead,...

flofrucht · 11/03/2011 11:04 AM

Added, but there's not really a chance of a brick.

Problem-solving :)

-flofrucht

AnddYFanatik · 11/03/2011 11:22 AM

Oh yeah!!
I bricked my psp. . . Dotdotdot

IT'S A JOKE!!
That work very fine
Thank you very much!! + Madwin

Vegetano1 · 11/03/2011 11:28 AM

(11/03/2011 11:04 AM)flofrucht Wrote: Added, but there's not really a chance of a brick.

Problem-solving :)

-flofrucht

Problem solving won't do you any good,. if you bricked you Go,.... brick=brick

i am happy 620TN is a HEN,. its a save way to run a cfw without touching the flash0,.. and i don't mind running the signed eboot once in awhile,..

Tetris999 · 11/03/2011 11:38 AM

Yeah, I'm too wuss to try this out; besides, right now I'm preferring 6.35 HEN over TN's ATM

DeMeTriC · 11/03/2011 01:08 PM

(11/03/2011 11:28 AM)Vegetano1 Wrote:
(11/03/2011 11:04 AM)flofrucht Wrote: Added, but there's not really a chance of a brick.

Problem-solving :)

-flofrucht

Problem solving won't do you any good,. if you bricked you Go,.... brick=brick

i am happy 620TN is a HEN,. its a save way to run a cfw without touching the flash0,.. and i don't mind running the signed eboot once in awhile,..

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ FINALLY someone who understands :) im not gonna try this on my 3000 4g when clicking the hen takes 3 secs to reboot. more and more people are getting bricks.

remember they said to try this on a 1000 or 2000v2s. hmmm wonder why.

motherboards on different PSPs have different modules.

Code:

PSP-1000
Tachyon = 0x00140000  Baryon = 0x00030600  Pommel = 103		TA-079 v1	1g	Phat 1.0
Tachyon = 0x00200000  Baryon = 0x00030600  Pommel = 103		TA-079 v2	1g	Phat 1.1
Tachyon = 0x00200000  Baryon = 0x00040600  Pommel = 103		TA-079 v3	1g	Phat 1.2
Tachyon = 0x00300000  Baryon = 0x00040600  Pommel = 103/104	TA-081		1g	Phat 2.0
Tachyon = 0x00400000  Baryon = 0x00114000  Pommel = 112		TA-082		1g	Phat 3.0
Tachyon = 0x00400000  Baryon = 0x00121000  Pommel = 112		TA-086		1g	Phat 4.0

PSP-2000
Tachyon = 0x00500000  Baryon = 0x0022B200  Pommel = 123		TA-085 v1	2g	Slim 1.0
Tachyon = 0x00500000  Baryon = 0x00234000  Pommel = 123		TA-085 v2	2g	Slim 1.1
Tachyon = 0x00500000  Baryon = 0x00243000  Pommel = 123		TA-088 v1	2g	Slim 2.0
Tachyon = 0x00500000  Baryon = 0x00243000  Pommel = 123		TA-088 v2	2g	Slim 2.1
Tachyon = 0x00600000  Baryon = 0x00243000  Pommel = 123		TA-088 v3	2g	Slim 2.2
Tachyon = 0x00500000  Baryon = 0x00243000  Pommel = 132		TA-090 v1	2g	Slim 3.0

PSP-3000
Tachyon = 0x00600000  Baryon = 0x00263100  Pommel = 132/133	TA-090 v2	3g	Brite 1.0
Tachyon = 0x00600000  Baryon = 0x00285000  Pommel = 133		TA-092		3g	Brite 2.0
Tachyon = 0x00810000  Baryon = 0x002C4000  Pommel = 141/143    	TA-093    	4g	Brite 3.0
Tachyon = 0x00810000  Baryon = 0x002e4000  Pommel =      	TA-0    	6g	Brite X.0
Tachyon = 0x00	      Baryon = 0x00 	   Pommel =      	TA-0    	7g	Brite X.0
Tachyon = 0x00720000  Baryon = 0x00304000  Pommel = 133     	TA-095    	9g	Brite X.0

PSP-N1000
Tachyon = 0x00720000  Baryon = 0x00304000  Pommel = 133       	TA-091   	5g  	Go 1.0
Tachyon = 0x00800000  Baryon = 0x002A      Pommel =        	TA-094

im getting annoyed with this now... But you've been warned. A Brick is a Brick.

Also if it does work, your psp will not function normally but it wouldn't be visible to you.

AnddYFanatik · 11/03/2011 02:07 PM

(11/03/2011 01:08 PM)DeMeTriC Wrote:
(11/03/2011 11:28 AM)Vegetano1 Wrote:
(11/03/2011 11:04 AM)flofrucht Wrote: Added, but there's not really a chance of a brick.

Problem-solving :)

-flofrucht

Problem solving won't do you any good,. if you bricked you Go,.... brick=brick

i am happy 620TN is a HEN,. its a save way to run a cfw without touching the flash0,.. and i don't mind running the signed eboot once in awhile,..

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ FINALLY someone who understands :) im not gonna try this on my 3000 4g when clicking the hen takes 3 secs to reboot. more and more people are getting bricks.

remember they said to try this on a 1000 or 2000v2s. hmmm wonder why.

motherboards on different PSPs have different modules.
Code:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
PSP-1000
Tachyon = 0x00140000  Baryon = 0x00030600  Pommel = 103		TA-079 v1	1g	Phat 1.0
Tachyon = 0x00200000  Baryon = 0x00030600  Pommel = 103		TA-079 v2	1g	Phat 1.1
Tachyon = 0x00200000  Baryon = 0x00040600  Pommel = 103		TA-079 v3	1g	Phat 1.2
Tachyon = 0x00300000  Baryon = 0x00040600  Pommel = 103/104	TA-081		1g	Phat 2.0
Tachyon = 0x00400000  Baryon = 0x00114000  Pommel = 112		TA-082		1g	Phat 3.0
Tachyon = 0x00400000  Baryon = 0x00121000  Pommel = 112		TA-086		1g	Phat 4.0

PSP-2000
Tachyon = 0x00500000  Baryon = 0x0022B200  Pommel = 123		TA-085 v1	2g	Slim 1.0
Tachyon = 0x00500000  Baryon = 0x00234000  Pommel = 123		TA-085 v2	2g	Slim 1.1
Tachyon = 0x00500000  Baryon = 0x00243000  Pommel = 123		TA-088 v1	2g	Slim 2.0
Tachyon = 0x00500000  Baryon = 0x00243000  Pommel = 123		TA-088 v2	2g	Slim 2.1
Tachyon = 0x00600000  Baryon = 0x00243000  Pommel = 123		TA-088 v3	2g	Slim 2.2
Tachyon = 0x00500000  Baryon = 0x00243000  Pommel = 132		TA-090 v1	2g	Slim 3.0

PSP-3000
Tachyon = 0x00600000  Baryon = 0x00263100  Pommel = 132/133	TA-090 v2	3g	Brite 1.0
Tachyon = 0x00600000  Baryon = 0x00285000  Pommel = 133		TA-092		3g	Brite 2.0
Tachyon = 0x00810000  Baryon = 0x002C4000  Pommel = 141/143    	TA-093    	4g	Brite 3.0
Tachyon = 0x00810000  Baryon = 0x002e4000  Pommel =      	TA-0    	6g	Brite X.0
Tachyon = 0x00	      Baryon = 0x00 	   Pommel =      	TA-0    	7g	Brite X.0
Tachyon = 0x00720000  Baryon = 0x00304000  Pommel = 133     	TA-095    	9g	Brite X.0

PSP-N1000
Tachyon = 0x00720000  Baryon = 0x00304000  Pommel = 133       	TA-091   	5g  	Go 1.0
Tachyon = 0x00800000  Baryon = 0x002A      Pommel =        	TA-094   
im getting annoyed with this now... But you've been warned. A Brick is a Brick.

Also if it does work, your psp will not function normally but it wouldn't be visible to you.

I have a psp 3004 4G Vibrant blue that work for me you can test it with test mode:D

SonicTheHedgehog · 11/03/2011 04:57 PM

well, this is working on my PSP 3006 3g

vinrose67 · 11/03/2011 05:02 PM

i haven't touch my PSP GO for a while! is this means that you will stay on 6.20 TN-D Permanent even you take off battery?

Threaded Mode \| Linear Mode [Tutorial] Install 6.20 TN-D Permanent Patch on every PSP
Author	Message