Quote:boot_change.prx ver 1.01

Overview
Prometheus ISO Loader V0.1/0.2 plug-in software which can not be enforced directly in the execution

Operating environment
PSP-go/6.20TN-B Prometheus ISO Loader V0.2 tested

Installation
/ Seplugins / a boot_change.prx, boot_change.ini, boot_change_00.db ~ boot_change_02.db. Boot_change.fnt Copy
/ Seplugins / VSH.TXT of the ef0: / seplugins / boot_change.prx include additional one, start it again
(PSP-go if it is not, ms0: / seplugins / boot_change.prx append 1)

boot_change.ini start button and edit the path of Prometheus ISO Loader
(The attachment is a PSP-go for it, otherwise it is a ms0 ef0 change, etc.)

Using
Start button (□ Standard + right trigger) is selected in the screen
Choose a soft side, set in writing ○, × are finished
You can change the data files up and down
If you revert to the standard state Standard writes △

If necessary edit the file db / Please add

Notes
is a Japanese font file boot_change.fnt
But does not work with, garbled Japanese

Or caused by software problems, and to freeze and when returning to main menu

If you need to reboot boot_change.db changes not only
When done reading the menu display

************************************************** *********************
* The starting configuration
· Boot_change.ini specified in the

Specifies the activation key in the first line. The standard "□ + Right trigger" is

The following key | can be separated by

PSP_CTRL_CIRCLE / PSP_CTRL_CROSS / PSP_CTRL_SQUARE / PSP_CTRL_TRIANGLE
PSP_CTRL_UP / PSP_CTRL_DOWN / PSP_CTRL_RIGHT / PSP_CTRL_LEFT
PSP_CTRL_RTRIGGER / PSP_CTRL_LTRIGGER
PSP_CTRL_VOLUP / PSP_CTRL_VOLDOWN
PSP_CTRL_SCREEN / PSP_CTRL_NOTE / PSP_CTRL_SELECT / PSP_CTRL_START
PSP_CTRL_DISC / PSP_CTRL_HOLD / PSP_CTRL_WLAN_UP

Cases: PSP_CTRL_START | PSP_CTRL_LTRIGGER | PSP_CTRL_RTRIGGER

The second line is the path of Prometheus ISO Loader

************************************************** *********************
* Boot_change_00.db About

Lists the names of the first data

Since the pair write in the startup file name and line 2 Software Name

Only the beginning of line or carriage return '#' is ignored if there is

Boot_change_01.db ~ boot_change_99.db filename of the data can be switched on by

You can also use the Japanese, UTF-8 please describe in

************************************************** *********************
takka@tfact.net

Special Thanks to N Qi / liquidzigong

************************************************** *********************
Development History

Ver 1.01
[BUG] Fixed the case to the standard irreversible

Ver 1.0
[NEW] implementation of the basic functions