Threaded Mode | Linear Mode

silver_surfer · 30/01/2009 05:22 PM

Zer01ne M33 Recovery Mode: A more modern recovery.

Zer01ne has posted its Recovery Menu for PSP Custom Firmware M33. This is the GUI updates official Sony.
Explore this utility participating in the "$1000 for the stage" in the category C / C + +.

Zer01ne M33 Recovery Mode For PSPGEN Devs Contest Recovery is a menu based on the M33 and with
the same graphical interface that the different menus Sony.

Dark_AleX has already taken over the menus used by Sony for its installers Custom Firmwares and
for Despertar Del Cementerio, and is now Zer01ne that makes us enjoy a Recovery Menu more "modern".

The next version of the Recovery menu should include full compatibility with the Custom Firmware GEN.

For now, the menu "Plugins" and the format options and reset Flash1 Settings are not yet operational.

What works very well, for against, the installer/uninstaller that ensures its role perfectly.
You can test it without fear because when uninstalling possible, you'll get all your previous settings
(the program saves the original recovery before settling)

Coming in the next version:

     * Fixed bugs
     * Add options currently not available
     * Use the new version of the vlf
     * Creating a Zer01ne GEN Recovery Mode to Custom Firmware GEN
     * Added new options for customization of Zer01ne M33/GEN Recovery Mode

Download
Source
Google for the translation I just edited some stuff - Spidey @ PinoyPSP/PSP4NOOBZ

WARNING: TRY AT YOUR OWN RISK!!!

Torch · 30/01/2009 06:20 PM

You realize that if any of your RCOs that are used by VLF are corrupted, the menu will not work. So basically if you install a corrupted them, this recovery menu will crash as well.

Its better if the author makes a copy of the original RCOs on the first run and loads resources from that instead of the default flash0: ones.

matchung · 30/01/2009 08:10 PM

nice GUI, but not practical for recovery mode.

quite annoying when using an EBOOT to get into recovery

SkyDX · 31/01/2009 03:44 AM

Yeah... someone needs to put this on R....

Diabelski Chojrak · 31/01/2009 06:03 AM

..is it works on any m33 or only 5.xx m33/gen?

matchung · 31/01/2009 09:48 AM

z7shaft Wrote:the eboot is only for installing. 

you can boot this with R.

:ahhyes:really? try later :)

edit1: can't get into recovery anymore after installation.. black screen then power off..

Mr. Shizzy · 31/01/2009 12:39 PM

matchung Wrote:edit1: can't get into recovery anymore after installation.. black screen then power off..

Eewwww. Won't be using this then...

matchung · 31/01/2009 10:38 PM

gave up..

re-flash my 500m33-06, install GUI, same, power on black screen, power off

uninstall GUI, re-format my Flash1, install GUI again, same, nothing help...

my fat v82..

ZiNgA BuRgA · 01/02/2009 12:51 AM

Yeah, I don't think the recovery really should be fancy - in all seriousness, you probably shouldn't be going into there too often.

Nevertheless, nice concept :P

Threaded Mode \| Linear Mode [Released] Zer01ne M33 Recovery Mode: A more modern recovery.
Author	Message