Other important stuff
---------------------
* If your Genesis/MD game has graphical glitches, this is most likely because
"accurate renderer" is not enabled (see options).
* Sega/Mega CD: If the game hangs after Sega logo, you may need to enable
"better sync" and/or "Scale/Rot. fx" options, found in "Sega/Mega CD options"
submenu, and then reset the game. Some other games may also require
"CDDA audio" and "PCM audio" to be enabled to work (enabled by default).
Incorrectly named/missing mp3s may also be the cause.
* Sega/Mega CD: If the background music is missing, you might have named your
MP3s incorrectly. Read "How to run Sega/Mega CD games" section again.
* Sega/Mega CD: If the game music plays too fast/too slow/out of sync, you have
encoded your MP3s incorrectly. You will have to re-encode and/or resample them.
PicoDrive is not a mp3 player, so all mp3s MUST be encoded at 44.1kHz stereo.
Badly encoded mp3s can cause various kind of problems, like noises, incorrect
playback speeds, not repeating music or even prevent game from starting.
Some games (like Snatcher) may hang in certain scenes because of this.
Some mp3 rippers/encoders remove silence and beginning/end of audio tracks,
what causes audio desyncs and/or mentioned problems.
If you have cue/bin rip, you can use the bin_to_cso_mp3 tool (included with
the emulator) to make a proper iso/mp3 rip.
* Sega/Mega CD: If your games hangs at the BIOS screen (with planets shown),
you may be using a bad BIOS dump. Try another from a different source.
* Some Sega/Mega CD games don't use Z80 for anything, but they leave it active,
so disabling Z80 manually (in advanced options) improves performance.
* Use lower bitrate for better performance (96 or 128kbps CBRs recommended).
Configuration
-------------
1. "Renderer"
This option allows to switch between fast and accurate renderers. The fast one
is much faster, because it draws the whole frame at a time, instead of doing it
line by line, like the accurate one does. But because of the way it works it
can't render any mid-frame image changes (raster effects), so it is useful only
for some games.
2. "Show FPS"
Self-explanatory. Format is XX/YY, where XX is the number of rendered frames and
YY is the number of emulated frames per second.
3. "Frameskip"
How many frames to skip rendering before displaying another.
"Auto" is recommended.
4. "Enable sound"
Does what it says. You must enable at least YM2612 or SN76496 (in advanced options,
see below) for this to make sense (already done by default).
5. "Sound Quality"
Sound sample rate, affects sound quality and emulation performance.
22050Hz setting is the recommended one.
6. "6 button pad"
If you enable this, games will think that 6 button gamepad is connected. If you
go and reconfigure your keys, you will be able to bind X,Y,Z and mode actions.
7. "Region"
This option lets you force the game to think it is running on machine from the
specified region, or just to set autodetection order. Also affects Sega/Mega CD.
8. "Use SRAM/BRAM savestates"
This will automatically read/write SRAM (or BRAM for Sega/Mega CD) savestates for
games which are using them. SRAM is saved whenever you enter the menu or exit the
emulator.
9. "Confirm savestate"
Allows to enable confirmation on savestate saving (to prevent savestate overwrites),
on loading (to prevent destroying current game progress), and on both or none, when
using shortcut buttons (not menu) for saving/loading.
10. "Save slot"
This is a slot number to use for savestates. This can also be configured to be
changed with a button (see "key configuration").
11. "CPU/bus clock"
This allows to change CPU and bus clocks for PSP. 333MHz is recommended.
12. "[Display options]"
Enters Display options menu (see below).
13. "[Sega/Mega CD options]"
Enters Sega/Mega CD options menu (see below).
14. "[advanced options]"
Enters advanced options menu (see below).
15. "Save cfg as default"
If you save your config here it will be loaded on next ROM load, but only if there
is no game specific config saved (which will be loaded in that case).
You can press left/right to switch to a different config profile.
16. "Save cfg for current game only"
Whenever you load current ROM again these settings will be loaded
Advanced configuration
----------------------
Enter [advanced options] in config menu to see these options.
1. "Disable sprite limit"
The MegaDrive/Genesis had a limit on how many sprites (usually smaller moving
objects) can be displayed on single line. This option allows to disable that
limit. Note that some games used this to hide unwanted things, so it is not
always good to enable this option.
2. "Emulate Z80"
Enables emulation of Z80 chip, which was mostly used to drive the other sound chips.
Some games do complex sync with it, so you must enable it even if you don't use
sound to be able to play them.
3. "Emulate YM2612 (FM)"
This enables emulation of six-channel FM sound synthesizer chip, which was used to
produce sound effects and music.
4. "Emulate SN76496 (PSG)"
This enables emulation of additional sound chip for additional effects.
Note: if you change sound settings AFTER loading a ROM, you may need to reset
game to get sound. This is because most games initialize sound chips on
startup, and this data is lost when sound chips are being enabled/disabled.
5. "gzip savestates"
This will always apply gzip compression on your savestates, allowing you to
save some space and load/save time.
6. "Don't save last used ROM"
This will disable writing last used ROM to config on exit (what might cause SD
card corruption according to DaveC).
Sega/Mega CD options
--------------------
1,2,3. "USA/EUR/JAP BIOS"
These options just show if your BIOS files were correctly detected by the
emulator (it shows the filename it is using). If so, you can press Start to
test your BIOS.
4. "CD LEDs"
The Sega/Mega CD unit had two blinking LEDs (red and green) on it. This option
will display them on top-left corner of the screen.
5. "CDDA audio (using mp3s)"
This option enables CD audio playback.
6. "PCM audio"
This enables 8 channel PCM sound source. It is required for some games to run,
because they monitor state of this audio chip.
7. "ReadAhead buffer"
This option can prefetch more data from the CD image then requested by game
(to avoid accessing card later), what can improve performance in some cases.
"OFF" is the recommended setting.
8. "Save RAM cart"
Here you can enable 64K RAM cart. Format it in BIOS if you do.
9. "Scale/Rot. fx"
The Sega/Mega CD had scaling/rotation chip, which allows effects similar to
"Mode 7" effects in SNES. Unfortunately emulating it is slow, and very few games
used it, so it's better to disable this option, unless game really needs it.
10. "Better sync"
This option is similar to "Perfect synchro" in Gens. Some games require it to run,
for example most (all?) Wolfteam games, and some other ones. Don't use it for
games which don't need it, it will just slow them down.
Display options
---------------
1. "Scale factor"
This allows to resize the displayed image by using the PSP's hardware. The number is
used to multiply width and height of the game image to get the size of image to be
displayed. If you just want to make it fullscreen, just use "Set to fullscreen"
setting below.
2. "Hor. scale (for low res. games)"
This one works similarly as the previous setting, but can be used to apply additional
scaling horizontally, and is used for games which use lower (256 pixel wide) Gen/MD
resolution.
3. "Hor. scale (for hi res. games)"
Same as above, only for higher (320 pixel wide) resolution using games.
4. "Bilinear filtering"
If this is enabled, PSP hardware will apply bilinear filtering on the resulting image,
making it smoother, but blurry.
5. "Gamma adjustment"
Color gamma can be adjusted with this.
6. "Black level"
This can be used to reduce unwanted "ghosting" effect for dark games, by making
black pixels brighter. Use in conjunction with "gamma adjustment" for more effect.
7. "Wait for vsync"
Wait for the screen to finish updating before switching to next frame, to avoid tearing.
There are 3 options:
* never: don't wait for vsync.
* sometimes: wait only if emulator is running fast enough.
* always: always wait (causes emulation slowdown).
8. "Set to unscaled centered"
Adjust the resizing options to set game image to it's original size.
9. "Set to fullscreen"
Adjust the resizing options to make the game image fullscreen.
Key configuration
-----------------
Select "Configure controls" from the main menu. Then select "Player 1" and you will
see two columns. The left column lists names of Genesis/MD controller buttons, and
the right PSP ones, which are assigned to them. If you bind 2 different PSP buttons
to the same action, you will get a combo (which means that you will have to press
both buttons for that action to happen.
Cheat support
-------------
To use Got to go/patch codes, you must type them into your favorite text editor, one
per line. Comments may follow code after a whitespace. Only GameGenie and
Genecyst patch formats are supported.
Examples:
Genecyst patch (this example is for Sonic):
00334A:0005 Start with five lives
012D24:0001 Keep invincibility until end of stage
009C76:5478 each ring worth 2
009C76:5678 each ring worth 3
...
Game Genie patch (for Sonic 2):
ACLA-ATD4 Hidden palace instead of death egg in level select
...
Both Got to go and patch codes can be mixed in one file.
When the file is ready, name it just like your ROM file, but with additional
.pat extension, making sure that case matches.
Examples:
ROM: Sonic.zip
PATCH FILE: Sonic.zip.pat
ROM: Sonic 2.bin
PATCH FILE: Sonic 2.bin.pat
Put the file into your ROMs directory. Then load the .pat file as you would
a ROM. Then Cheat Menu Option should appear in main menu.
What is emulated?
-----------------
Genesis/MegaDrive:
main 68k @ 7.6MHz: yes, FAME/C core
z80 @ 3.6MHz: yes, CZ80 core
VDP: yes, except some quirks not used by games
YM2612 FM: yes, optimized MAME core
SN76489 PSG: yes, MAME core
SVP chip: yes! This is first emu to ever do this.
Some in-cart mappers are supported too.
Sega/Mega CD:
another 68k @ 12.5MHz: yes, FAME/C too
graphics scaling/rotation chip (custom ASIC): yes
PCM sound source: yes
CD-ROM controller: yes (mostly)
bram (internal backup RAM): yes
Problems / limitations
----------------------
* 32x is not emulated.
* SVP emulation is terribly slow.
* Various VDP quirks (window bug, scroll size 2, etc.) are not emulated,
as very few games use this (if any at all).
* The emulator is not 100% accurate, so some things may not work as expected.
Credits
-------
This emulator is made of the code from following people/projects:
notaz
GP2X, UIQ, PSP, Gizmondo ports, CPU core hacks,
lots of additional coding (see changelog).
Homepage:
http://notaz.gp2x.de/
Dave
Cyclone 68000 core, Pico emulation library
Homepage:
http://www.finalburn.com/
Chui
FAME/C 68k interpreter core
(based on C68K by Stephane Dallongeville)
Stephane Dallongeville (written), NJ (optimized)
CZ80 Z80 interpreter core
Tatsuyuki Satoh, Jarek Burczynski, MAME development
software implementation of Yamaha FM sound generator
MAME development
Texas Instruments SN76489 / SN76496 programmable tone/noise generator
Homepage:
http://www.mame.net/
Stephane Dallongeville
Gens, MD/Mega CD/32X emulator. Most Sega CD code is based on this emu.
people @ ps2dev.org forums / PSPSDK crew
libaudiocodec code (by cooleyes)
other sample code
Additional thanks
-----------------
* Charles MacDonald (
http://cgfm2.emuviews.com/) for old but still very useful
info about genesis hardware.
* Steve Snake for all that he has done for Genesis emulation scene.
* Tasco Deluxe for his reverse engineering work on SVP and some mappers.
* Bart Trzynadlowski for his SSFII and 68000 docs.
* Haze for his research (
http://haze.mameworld.info).
* Lordus, Exophase and Rokas for various ideas.
* Nemesis for his YM2612 research.
* Mark and Jean-loup for zlib library.
* ketchupgun for the skin.
* Anyone else I forgot. You know who you are.
Changelog
---------
1.50
+ Added some basic support for Sega Pico, a MegaDrive-based toy.
+ Added proper support for cue/bin images, including cdda playback.
.cue sheets with iso/cso/mp3/wav files listed in them are now
supported too (but 44kHz restriction still applies).
+ Added bin_to_cso_mp3 tool, based on Exophase's bin_to_iso_ogg.
The tool can convert .cue/.bin Sega CD images to .cso/.mp3.
* Greatly improved Sega CD load times.
* Changed how scheduling between 68k and z80 is handled. Improves
performance for some games. Credits to Lordus for the idea.
* YM2612 state was not 100% saved, this should be better now.
* Improved renderer performance for shadow/hilight mode.
* Added a hack for YM2612 frequency overflow issue (bleep noises
in Shaq Fudge you, Spider-Man - The Animated Series (intro music), etc.)
Credits to Nemesis @ spritesmind forum. Works only if sound rate
is set to 44kHz.
+ Implemented some sprite rendering improvements, as suggested by
Exophase. Games with lots of sprites now perform better.
+ Added better idle loop detection, based on Lordus' idea again.
- "accurate timing" option removed, as disabling it no longer
improves performance.
- "accurate sprites" was removed too, the new sprite code can
properly handle sprite priorities in all cases.
* Timers adjusted again.
* Improved .smd detection code.
* ARM: fixed a bug in DrZ80 core, which could cause problems in
some rare cases.
* ARM: fixed a problem of occasional clicks on MP3 music start.
* Minor general optimizations and menu improvements.
* Fixed a bug in Sega CD savestate loader, where the game would
sometimes crash after load.
* Fixed a crash of games using eeprom (introduced in 1.40b).
* PSP: fixed suspend/resume (hopefully for real).
1.40c
* Fixed a problem with sound in Marble Madness.
* GP2X: Fixed minor problem with key config.
1.40b
* Fixed sprite masking code. Thanks to Lordus for explaining how it works.
+ Added "disable sprite limit" option.
+ PSP: added black level adjustment to display options.
* Changed reset to act as 'soft' reset.
+ Added detection for Puggsy (it doesn't really have sram).
* Some small timing adjustments.
1.40a
* GP2X: Fixed a binding problem with up and down keys.
* Default game config no longer overrides global user config.
1.40
+ Added support for SVP (Sega Virtua Processor) to emulate Virtua Racing,
wrote ARM recompiler and some HLE code for VR. Credits to Exophase and
Rokas for various ideas.
* Changed config file format, files are now human-readable. Game specific
configs are now held in single file (but old game config files are still
read when new one is missing).
* Fixed a bug where some key combos didn't work as expected.
* Fixed a regression in renderer (ARM ports only, some graphic glitches in
rare cases).
* Adjusted fast renderer to work with more games, including VR.
* Fixed a problem where SegaCD RAM cart data was getting lost on reset.
* GP2X: Greatly reduced SegaCD FMV game slowdowns by disabling read-ahead
in the Linux kernel and C library (thanks to Rokas and Exophase for ideas
again). Be sure to keep "ReadAhead buffer" OFF to avoid slowdowns.
+ PicoDrive now comes with a game config file for some games which need
special settings, so they should now work out-of-the-box. More games will
be added with later updates.
+ GP2X: Files now can be deleted by pressing A+SELECT in the file browser.
1.35b
* PSP: mp3 code should no longer fail on 1.5 firmware.
+ PSP: added gamma adjustment option.
+ Added .cso ISO format support. Useful for non-FMV games.
* It is now possile to force a region after the ROM is loaded.
* Fixed a sram bug in memhandlers (fixes Shining in the Darkness saves).
* PSP: fixed another bug in memhanlers, which crashed the emu for some games
(like NBA Jam and NHL 9x).
+ PSP: added suspend/resume handling for Sega CD games.
+ GP2X: added additional low volume levels for my late-night gaming sessions
(in stereo mode only).
+ GP2X: added "fast forward" action in key config. Not recommended to use for
Sega CD, may case problems there.
* Some other small tweaks I forgot about.
1.35a
* PSP: fixed a bug which prevented to load any ROMs after testing the BIOS.
* PSP: fixed incorrect CZ80 memory map setup, which caused Z80 crashes and
graphics corruption in EU Mega CD model1 BIOS menus.
+ PSP: added additional "set to 4:3 scaled" display option for convenience.
+ PSP: Added an option to disable frame limitter (works only with non-auto frameskip).
1.35
+ PSP port added. Lots of new code for it. Integrated modified FAME/C, CZ80 cores.
+ Some minor generic optimizations.
* Patched some code which was crashing under PSP, but was working in GP2X/Giz
(although it should have crashed there too).
* Readme updated.
1.34
+ Gizmondo port added.
+ Some new optimizations in memory handlers, and for shadow/hilight mode.
+ Added some hacks to make more games work without enabling "accurate timing".
* Adjusted timing for "accurate timing" mode and added preliminary VDP FIFO
emulation. Fixes Double Dragon 2, tearing in Chaos Engine and some other games.
* Fixed a few games not having sound at startup.
* Updated serial EEPROM code to support more games. Thanks to EkeEke for
providing info about additional EEPROM types and game mappers.
* The above change fixed hang of NBA Jam.
* Minor adjustments to control configurator.
1.33
* Updated Cyclone core to 0.0088.
+ Added A r k's usbjoy fix.
+ Added "perfect vsync" option, which adjusts GP2X LCD refresh rate and syncs
emulation to it to eliminate tearing and ensure smoothest scrolling possible.
+ Added an option to use A_SN's camma curve for gamma correction (improves dark
and bright color display for mk2s).
* Sometimes stray sounds were played after loading a savestate. Fixed.
* Fixed a problem where >6MB mp3s were corrupted in memory (sound glitches in
Snatcher).
* PD no longer overwrites video player code in memory, video player now can be
used after exiting PicoDrive.
* Fixed a bug which was causing Sonic 3 code to deadlock in some rare conditions
if "accurate timing" was not enabled.
* Fixed support for large hacked ROMs like "Ultimate Mortal Kombat Trilogy".
Upto 10MB hacked ROMs are supported now.
+ Config profiles added (press left/right when saving config).
* Changed key configuration behavior to the one from gpfce (should be more
intuitive).
+ Added some skinning capabilities to the menu system with default skin by
ketchupgun. Delete skin directory if you want old behaviour.
* Some other little tweaks I forgot about.
1.32
+ Added some new scaling options.
+ Added ability to reload CD images while game is running (needed for games
with multiple CDs, like Night Trap).
+ Added RAM cart emulation.
* Fixed DMA timing emulation (caused lock-ups for some genesis games).
* Idle loop detection was picking up wrong code and causing glitches, fixed.
* The ym2612 code on 940 now can handle multiple updates per frame
(fixes Thunger Force III "seiren" level drums for example).
* Memory handlers were ignoring some writes to PSG chip, fixed (missing sounds in
Popful Mail, Silpheed).
* Improved z80 timing, should fix some sound problems.
* Fixed a bug with sram register (fixes Phantasy Star 4).
* ROM loader was incorrectly identifying some ROMs as invalid. Fixed.
* Added code for PRG ram write protection register (Dungeon Explorer).
* The memory mode register change in 1.31 was unsafe and caused some glitches in
AH-3 Thunderstrike. Fixed.
* Fixed a file descriptor leak.
* Updated documentation, added Gmenu2x manual.
1.31
* Changed the way memory mode register is read (fixes Lunar 2, broken in 1.30).
* Fixed TAS opcode on sub-68k side (fixes Batman games).
* File browser now filters out mp3s, saves and some other files, which are not ROMS.
1.30
+ ISO files now can be zipped. Note that this causes VERY long loading times.
+ Added data pre-buffering support, this allows to reduce frequency of short pauses
in FMV games (caused by SD access), but makes those pauses longer.
* Fixed PCM DMA transfers (intro FMV in Popful Mail).
+ Properly implemented "decode" data transformation (Jaguar XJ220).
* Integrated "better sync" code into cyclone code, what made this mode much faster.
* Fixed a bug related to game specific config saving.
* Frameskipper was skipping sound processing, what caused some audio desyncs. Fixed.
* Fixed reset not working for some games.
+ New assembly optimized memory handlers for CD (gives at least a few fps).
Also re-enabled all optimizations from 0.964 release.
+ New idle-loop detection code for sub-68k. Speeds up at least a few games.
1.201
+ Added basic cheat support (GameGenie and Genecyst patches).
1.20
* Fixed a long-standing problem in audio mixing code which caused slight distortions
at lower sample rates.
* Changed the way 920 and 940 communicates (again), should be more reliable and give
slight performance increase.
* Some optimizations in audio mixing code.
* Some menu changes (background added, smaller font in ROM browser, savestate loader
now can select slots).
+ 1M mode DMA transfers implemented (used by FMV games like Night Trap and Sewer Shark).
+ Games now can run code from WORD RAM in 1M mode (fixes Adventures of Willy Beamish).
+ "Cell arrange" address mapping is now emulated (Heart of the alien).
+ "Color numeric operation" is now emulated (text in Lunar 2, Silpheed intro graphics).
+ "Better sync" option added (prevents some games from hanging).
1.14
+ Region autodetection now can be customized.
* When CDDA music tracks changed, old buffer contents were incorrectly played. Fixed.
* BRAM is now automatically formatted (no need to enter BIOS menu and format any more).
* Games now can be reset, CDDA music no longer breaks after loading another ISO.
* Fixed a race condition between 920 and 940 which sometimes caused CDDA music not to play.
+ Savestates implemented for Sega/Mega CD.
+ PCM sound added.
* Some mixer code rewritten in asm. 22kHz and 11kHz sound rates are now supported in
Mega CD mode (but mp3s must still be 44kHz stereo).
+ Timer emulation added.
* CDC DMA tansfers fixed. Snatcher and probably some more games now boot.
* 2M word RAM » VDP transfers fixed, no more corruption in Ecco and some other games.
1.10
+ GP2X: Added experimental Sega CD support.
+ GP2X: Added partial gmv movie playback support.
0.964
* GP2X: Fixed a sound buffer underflow issue on lower sample rate modes, which was
happening for NTSC games and causing sound clicks.
* GP2X: Redone key config to better support USB joysticks (now multiple joysticks
should be useable and configurable).
+ GP2X: Added save confirmation option.
+ GP2X: Added 940 CPU crash detection.
+ ALL: UIQ3 port added.
0.963
* GP2X: Gamma-reset-on-entering-menu bug fixed.
* GP2X: Recompiled PicoDrive with gcc profiling option set as described here:
http://www.gp32x.com/board/index.php?showtopic=28490
0.962
* GP2X: Fixed an issue with incorrect sounds in some games when dualcore operation
was enabled (for example punch sound in SOR).
* GP2X: Limited max volume to 90, because higher values often cause distortions.
* GP2X: Fixed a bug with lower res scaling.
* GP2X: Gamma is now reset on exit.
0.96
* ALL: Severely optimized MAME's YM2612 core, part of it is now rewritten in asm.
+ GP2X: The YM2612's code now can be run in GP2X's ARM940T CPU, what causes large
performance increase.
* ALL: Accurate renderers are slightly faster now.
+ GP2X: Using quadruple buffering instead of doublebuffer now, also updated
framelimitter, this should eliminate some scrolling and tearing problems.
* GP2X: Fixed some flickering issues of 8bit accurate renderer.
+ GP2X: craigix's RAM timings now can be enabled in the menu (see advanced options).
+ GP2X: Added ability to save config for specific games only.
+ GP2X: Gamma control added (using GP2X's hardware capabilities for this).
* GP2X: Volume keys are now configurable.
+ GP2X: GnoStiC added USB joystick support, I made it possible to use it for
player 2 control (currently untested).
* GP2X: squidgehack is now applied through kernel module (cleaner way).
0.95
* ALL: Fixed a bug in sprite renderer which was causing slowdowns for some games.
+ GP2X: Added command line support
+ GP2X: Added optional hardware scaling for lower-res games like Shining Force.
* ALL: Sound chips are now sampled 2 times per frame. This fixed some games which
had missing sounds (Vectorman 2 1st level, Thunder Force 3 water level,
etc.).
+ ALL: Added another accurate 8-bit renderer which is slightly faster and made it
default.
0.945
+ GP2X: Added frame limiter for frameskipped modes.
* GP2X: Increased brightness a bit (unused pixel bits now also contain data).
* GP2X: Suidgehack was not applied correctly (was applied before allocating some
high memory and had no effect).
0.94
+ Added GP2X port.
* Improved interrupt timing, Mazin Saga and Burning Force now works.
* Rewritten renderer code to better suit GP2X, should be faster on other
ports too.
+ Added support for banking used by 12-in-1 and 4-in-1 ROMs (thanks Haze).
+ Added some protection device faking, used by some unlicensed games like
Super Bubble Bobble, King of Fighters, Elf Wor, ... (thanks to Haze again)
+ Added primitive Virtua Racing SVP faking, so menus can be seen now.
0.93
* Fixed a problem with P900/P910 key configuration in FC mode.
* Improved shadow/hilight mode emulation. Still not perfect, but should be
enough for most games.
+ Save state slots added.
+ Region selector added.
0.92
VDP changes:
* VDP emulation is now more accurate (fixes flickering in Chase HQ II,
Super Hang-On and some other problems in other games).
* HV counter emulation is now much more accurate. Fixes the Asterix games,
line in Road Rash 3, etc.
* Minor sprite and layer scroll masking bugs fixed.
+ Added partial interlace mode renderer (Sonic 2 vs mode)
* Fixed a crash in both renderers when certain size window layers were used.
+ Added emulation of shadow/hilight operator sprites. Other shadow/hilight
effects are still unemulated.
+ Sprite emulation is more accurate, sprite limit is emulated.
+ Added "accurate sprites" option, which always draws sprites in correct
order and emulates sprite collision bit, but is significantly slower.
Emulation changes:
* Improved interrupt handling, added deferred interrupt emulation
(Lemmings, etc).
+ Added serial EEPROM SRAM support (Wonder Boy in Monster World,
Megaman - The Wily Wars and many EA sports games like NBA Jam).
+ Implemented ROM banking for Super Street Fighter II - The New Challengers
* Updated to the latest version of DrZ80 core, integrated memory handlers
in it for better performance. A noticeable performance increase, but save
states may not work from the previous version (you can only use them with
sound disabled in that case).
+ SRAM word read handler was using incorrect byte order, fixed.
Changes in Cyclone 0.0086:
+ Added missing CHK opcode handler (used by SeaQuest DSV).
+ Added missing TAS opcode handler (Gargoyles,Bubba N Stix,...). As in real genesis,
memory write-back phase is ignored (but can be enabled in config.h if needed).
+ Added missing NBCD and TRAPV opcode handlers.
+ Added missing addressing mode for CMP/EOR.
+ Added some minor optimizations.
- Removed 216 handlers for 2927 opcodes which were generated for invalid addressing modes.
+ Fixed flags for ASL, NEG, NEGX, DIVU, ADDX, SUBX, ROXR.
+ Bugs fixed in MOVEP, LINK, ADDQ, DIVS handlers.
* Undocumented flags for CHK, ABCD, SBCD and NBCD are now emulated the same way as in Musashi.
+ Added Uninitialized Interrupt emulation.
+ Altered timing for about half of opcodes to match Musashi's.
0.80
* Nearly all VDP code was rewritten in ARM asm. Gives ~10-25% performance
increase (depends on game).
* Optimized 32-column renderer not to render tiles offscreen, games which
use 32-column display (like Shining Force) run ~50% faster.
+ Added new "Alternative renderer", which gives another ~30-45% performance
increase (in addition to mentioned above), but works only with some games,
because it is missing some features (it uses tile-based renderering
instead of default line-based and disables H-ints).
+ Added "fit2" display mode for all FC gamers. It always uses 208x146 for
P800 and 208x208 for all other phones.
+ Added volume control for Motorolas (experimental).
VDP changes:
+ Added support for vertical window (used by Vapor Trail, Mercs, GRIND
Stormer and others).
+ Added sprite masking (hiding), adds some speed.
+ Added preliminary H counter emulation. Comix Zone and Sonic 3D Blast
special stage are now playable.
+ Added column based vertical scrolling (Gunstar Heroes battleship level,
Sonic and Knuckles lava boss, etc).
Emulation changes:
+ Re-added and improved Z80 faking when Z80 is disabled. Many games now can
be played without enabling Z80 (Lost Vikings, Syndicate, etc), but some
still need it (International Superstar Soccer Deluxe).
* Improved ym2612 timers, Outrun music plays at correct speed, voices in
Earthworm Jim play better, more games play sound.
* I/O registers now remember their values (needed for Pirates! Gold)
+ Added support for 6 button pad.
Changes in Cyclone 0.0083wip:
+ Added missing CHK opcode (used by SeaQuest DSV).
+ Added missing TAS opcode (Gargoyles). As in real genesis, write-back phase
is ignored (but is enabled for other systems).
Backported stuff from Snes9x:
* Fixed Pxxx jog up/down which were not working in game.
+ Added an option to gzip save states to save space.
+ The emulator now pauses whenever it is loosing focus, so it will now pause
when alarm/ponecall/battery low/... windows come up.
- Removed 'pause on phonecall' feature, as it is no longer needed.
+ Video fix for asian A1000s.
0.70
* Started using tools from "Symbian GCC Improvement Project", which give
considerable speed increase (~4fps in "center 90" mode).
* Rewrote some drawing routines in ARM assembly (gives ~6 more fps in
"center 90" mode).
* Minor improvement to 0 and 180 "fit" modes. Now they look slightly better
and are faster.
* Minor stability improvements (emulator is less likely to crash).
+ Added some background for OSD text for better readability.
+ Added Pal/NTSC detection. This is needed for proper sound speed.
+ Implemented Reesy's DrZ80 Z80 emu. Made some changes to it with hope to make
it faster.
+ Implemented ym2612 emu from the MAME project. Runs well but sometimes sounds
a bit weird. Could be a little faster, so made some changes too.
+ Implemented SN76489 emu from the MAME project.
+ Added two separate sound output methods (mediaserver and cmaudiofb) with
autodetection (needs testing).
* Fixed VDP DMA fill emulation (as described in Charles MacDonald's docs),
fixes Contra and some other games.
0.301
Launcher:
* Launcher now starts emulation process from current directory,
not from hardcoded paths.
* Improved 'pause on call' feature, should hopefully work with Motorola phones.
0.30
Initial release.
Disclaimer
----------
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
SEGA/Genesis/MegaDrive/SEGA-CD/Mega-CD/32X are trademarks of
Sega Enterprises Ltd.