Note: I FOUND WITHOUT FOLLOWING ANY TUTORIALS OR GUIDES BUT THEY WERE FOUND BEFORE, lol

1st animation

using 100 as float:


using -100 as float:


So to do this you will need:
- decrypted paf.prx
- ppe to edit the paf.prx, get it from here!

Open the paf.prx with ppe and change:

Change "size of unfocused main icons" to 100 or -100.
If you use 100 your xmb will look like the gif, if you use -100 your xmb will look like the gif but the icons will reverse when zooming out/in, also will do an affect when reversing again.

The xmb speed(both, vertical and horizontal) to something more than 200, i recommend 700.

CHANGE THE SIZE UNFOCUSED MEMSTICK ICONS TO 0.5!

YOU Don't NEED TO COMPRESS THE PRX, IF YOU Don't WANT, JUST DELETE THE DIC FOLDER AND PUT THE UNCOPRESSED PRX ISNTEAD OF COMPRESSED.

2nd animation

using 3 as float


using -3 as float


So to do this you will need:
- decrypted paf.prx
- ppe to edit the paf.prx, get it from here!

Open the paf.prx with ppe and change:

Change "size of unfocused main icons" to 3 or -3, negative numbers will reverse the icons and reverse them again, try it to see what happens, NOT RECOMMENDED MORE THAN 3 OR LESS THAN -3.

The xmb speed(both, vertical and horizontal) to something more than 200, i recommend 700.

The alpha channel of unfocused main icons to 0.

CHANGE THE SIZE UNFOCUSED MEMSTICK ICONS TO 0.5!

YOU Don't NEED TO COMPRESS THE PRX, IF YOU Don't WANT, JUST DELETE THE DIC FOLDER AND PUT THE UNCOPRESSED PRX ISNTEAD OF COMPRESSED.

3rd animation

This doesn't work with the network icon.
This will move the main icons to down.

using 40 as float:


So to do this you will need:
- decrypted paf.prx
- ppe to edit the paf.prx, get it from here!

Just change the focused main icon position to something more than 66 or less than 66.(lesss than 66 should make the icons go down)

CHANGE THE SIZE UNFOCUSED MEMSTICK ICONS TO 0.5!

YOU Don't NEED TO COMPRESS THE PRX, IF YOU Don't WANT, JUST DELETE THE DIC FOLDER AND PUT THE UNCOPRESSED PRX ISNTEAD OF COMPRESSED.

Note: the content below was found BY ME!.

please takeshi, i think you are the guy who made the paf editor so fill free to put this offsets there too.

How to Change the XMB Size
Note: It will affect main, icons, font, subicons and i don't know if will affect any other things, the clock and the battery arent affected.

Using 1.5 as float:


Using -1.5 as float:

IT REVERSES EVERYTHING, ON THE PIC IM PRESSING THE right arrow but the menu is going to the left.

You will neeed this:
- decrypted paf.prx
- Hex Editor


Offset to change:
19D9BC

Do not change the float to more than 2 or less than -2.
Less than -2 will do the icons reverse. It will reverse everything, if you press » it will go to left and vice versa.
CHANGE FLOATS Isn't THE SAME THINGS AS ETID TEXT STINGS! if you don't know how to do, just ask. :yes:



How to Change your Subicons Shadows size

Using 0.89999998 as float:


You will neeed this:
- decrypted paf.prx
- Hex Editor


So open your paf.prx with your Hex Editor and change this offsets.

offsets to change:
19CDF4 - SubIcon Shadows Width - change the float to something between 0 and 1
19CE40 - SubIcon Shadows Height - change the float to something between 0 and 1

Recommended:
values between 0.7 and 1

YOU Don't NEED TO COMPRESS THE PRX, IF YOU Don't WANT, JUST DELETE THE DIC FOLDER AND PUT THE UNCOPRESSED PRX ISNTEAD OF COMPRESSED.

How to Transform your image viewer, Sony Logo and line (i didnt notice any other things affected)


This is my sony logo: (float is 20)


This is my line: (float is 20)


This is picture viewer: (float is 20)


You will neeed this:
- decrypted paf.prx
- Hex Editor


So open your paf.prx with your Hex Editor and change this offset:
1A7EFC

Change for the float for what you want.

YOU Don't NEED TO COMPRESS THE PRX, IF YOU Don't WANT, JUST DELETE THE DIC FOLDER AND PUT THE UNCOPRESSED PRX ISNTEAD OF COMPRESSED.

The contend below wasn't found by me.
Here is a list: (ATTENTION! SOME OFFSETS ARENT IN THE BSTRONGAS THREAD, I FOUND THEM IN A JAPANESE SITE! THE ENGLISH IS A BIT BAD AS THIS WAS TRANSLATED WITH GOOGLE)

Offsets	Initial Float	Effect
0x19F38C	80	Space between main icons
0x19F394	200	Horizontal scrolling speed
0x19F3B8	1	Alpha channel of menu idea contest
0x19F3C0	1	Main menu icons & font "color"
0x19F4F8	1	Submenus font & line "color"
0x19F75C	200	Vertical scrolling speed
0x19F760	65	Space between subicons
0x19F764	60	Interval of the sub menu idea contest and the idea contest on that which are in the midst of selecting
0x19F7E0	1	Unfocused subicons alpha channel
0x19F800	1	Alpha channel of all texts other than main menu
0x19F828	1	Unfocused subicons "color"
0x19F82C	1	change the main menu font color without affecting the icons
0x1A03F8	1	Size of sub menu idea contest “of setting” other than
0x1A0418	1	Size of sub menu idea contest “of setting”
0x1A04F4	0.563	Unfocused MS contents size
0x1A0DE4	66	Focused main icon position(Y)
0x1A0DE8	63	Unfocused main icons position - doesn't work on Network icon -
0x1A0E10	6.43	Main menu text size
0x1A0E14	33	Main menu text position(Y)
0x1A0E38	0.7	alpha channel of unfocused main icons
0x1A0E40	0.78	While selecting size of main menu idea contest other than
0x19CE30	255	glow blinking rate?

The contend below WAS found by me.
Here is a list: (I FOUND MORE OFFSETS BUT I Won't PUT THEM HERE UNTIL I CAN KNOW WHAT THEY REALLY DO AND HOW DO I USE THEM)

Offsets	Initial Float	Effect
0x19D9BC	1	XMB Overall Size
0x19CDF4	1	SubIcon Shadows Width
0x19CE40	1	SubIcon Shadows Height
0x1A7EFC	1	It Transformes Sony Logo, Picture Viewer and Line

Shady545 Wrote:very short and to the point this is awesome
did you discover this by yourself?

yes i did and i found some more cool things that i don't know if someone found before, i will post soon.

yes you can do this in sub icons i can try it in 5 mins but im 90% sure of it.

i already madea tutorial but im testing the 2nd one right now to see what's the min value and the max value that you can use to make your icons like that.

EDIT! no you can't do that i will try find an affset that do that but i don't think i will find.

new tutorial:
idk if someone did this before but here it is for those who don't know, preview: