Quote:Pliant Technology Inc. today released its first series of enterprise-class solid state disk (SSD) drives based on a proprietary ASIC design that the company claims can handle -- without using any cache -- more than twice the input/output operations per second (IOPS) as the top competitive drives.

The first two two enterprise flash drive (EFDs), the EFD LS and EFD LB models, are 3.5-in. and 2.5-in. drives that can produce up to 180,000 IOPS and 140,000 IOPS respectively. The 3.5-in. drive can produce up to to 500MB/sec sustained read or 320MB/sec write rates and the 2.5-in. up to 420MB/sec read and 220MB/sec write rates, Pliant said.

"Put it on a log application and write to it as hard as you want for five years -- it will run 24/7 for at least that long," said Greg Goelz, vice president of marketing at the three-year-old startup.
Pliant's new EFD LS and EFD LB models, 3.5-in. and 2.5-in. SSD drives
Pliant's new EFD LS and EFD LB models, 3.5-in. and 2.5-in. SSD drives

Pliant also claims there is no limit to the number of writes that can be performed to the drive and that it will work without slowdown for at least five years. The drives are aimed at equipment manufacturers such as EMC Corp., Hewlett-Packard Co., Hitachi Data Systems and Sun Microsystems Inc., the company said.

"They're able to claim some pretty solid performance numbers on read and writes and they're also able to claim unlimited program and erase [write/erase] cycles," said Joseph Unsworth, research director for NAND flash semi-conductors at Gartner Inc. "That's big. In an enterprise environment, that's one of the major concerns: The wear out of the SSD."

Most enterprise-class SSD companies today use Fibre Channel connectivity. Pliant's first products use serial-attached SCSI (SAS), which most industry observers believe is the interconnect of the future for servers and storage arrays. "You don't want to saturate your [server] CPU cores and then find out wee have this great SSD but the bottleneck is now the interface," Unsworth said. "It's all about speed."

SAS currently supports 6Gbit/sec data transfer speeds and its roadmap indicates 12Gbit/sec rate by by 2012. Fibre Channel drives are currently capable of 4Gbit/sec data transfer speeds, and while Fibre Channel switches and interface cards are now emerging with 8Gbit/sec speeds. SAS is eclipsing those speeds at the device level.

"Six gigabit SAS in terms of data throughput is going to be the performance leader," said Jeff Janukowicz, a flash memory analyst with IDC in Framingham, Mass. STEC Inc., the top provider today of enterprise-class SSDs, recently announced its own SAS model. But even that next-generation product produces a maximum of 80,000 IOPS compared with Pliant's 180,000 IOPS.

Pliant's SSD controller architecture is not vastly different from those of other high-end SSD manufacturers. It has twelve independent I/O channels to interleaved single level cell (SLC) NAND flash chips from Samsung Corp. The drives are configured as RAID 0 for increased performance and the controller.

Most enterprise-class SSDs today also use a general purpose field programmable gate array (FPGA) controllers as opposed to Pliant's custom controller, which is programmed specifically to address SSD issues, such as wear leveling (spreading writes more evenly throughout the memory) and write amplification (reducing the number of operations required for a write), according to analysts.

Also unique to Pliant's controller is the use of a triple redundancy error correction code algorithm to ensure that meta data - which is used to locate data on the drive -- is saved even if two copies of it become corrupted. Also, the lack of any DRAM cache, which can store data writes more quickly, laying them down on the NAND flash chips during non-peak performance periods, is also unique to Pliant's enterprise-class product.

Some of today's more popular server-class SSDs, like those from Intel, use serial ATA interfaces, which has a half-duplex interface as opposed to SAS, which like Fibre Channel, is full duplex. The difference between the two is that full duplex is dual ported, allowing for reads and writes at the same time. Single-port half-duplex allows for one or the other.

Pliant, based in Milpitas, Calif., released its new SSDs for beta testing last year and plans to make them generally available later this month. The company raised $15 million in Series C funding in March, which was used to ramp up production of the SSDs, the company said.

"I think with Pliant's announcement wee're starting to see some of the true promises of SSD coming to market," Janukowicz said. "A lot of these applications are demanding, mission critical, 24/7 applications and they require high reliability, efficiency and predictable performance. And, based on Pliant's claims, they see to have addressed many of those important issues."

The company refused to release a suggested retail price for the drives. However, it did note that the drives will be more expensive than Intel's X25-E SSD, which sells for $780 for a 64GB SATA model, and less expensive than STECs Zeus SSD, which sells for about $6,000 for a 73GB Fibre Channel model.

- Source: [Computer World]

Great if you have the money, lol.


On the other hand, Intel's Braidwood which comes on the mobo may be an alternative for typical users...