Threaded Mode | Linear Mode

Raisen · 26/10/2008 12:49 PM

I have read this book but I don't do step two, please could you do for me? The prxs are firmware 5.00

http://www.megaupload.com/es/?d=IUKOO9K3

Thanks! Sorry for my english :( xD

akide · 26/10/2008 01:16 PM

Tat is >>>> http://endlessparadigm.com/forum/showthr...p?tid=4142
:)

demonchild · 26/10/2008 01:18 PM

Get the PSARDUMPER for 5.00 HERE

Move it to /PSP/GAME5xx

Download the 5.00 EBOOT HERE

Move that to the root of your MS.

When done:

1)Disconnect USB, and launch the PSARDUMPER as you would a homebrew, etc.
2)Press [] once its loads.
3)Wait. When it is done, the PSP will exit to the XMB.
4)Re-enable USB Connection.
5)Decrypted files can be found at ms0:/F0 (The F0 folder on the root of your MS)
6)PRXs are going to be in F0/kd, and F0/vsh/module

Have fun.

Vegetano1 · 26/10/2008 01:31 PM

demonchild Wrote:Get the PSARDUMPER for 5.00 HERE

Move it to /PSP/GAME5xx

Download the 5.00 EBOOT HERE

Move that to the root of your MS.

When done:

1)Disconnect USB, and launch the PSARDUMPER as you would a homebrew, etc.
2)Press [] once its loads.
3)Wait. When it is done, the PSP will exit to the XMB.
4)Re-enable USB Connection.
5)Decrypted files can be found at ms0:/F0 (The F0 folder on the root of your MS)
6)PRXs are going to be in F0/kd, and F0/vsh/module

Have fun.

thanks demonchild i try this too!

you could make a mini tutoriol of this!! or you mind me doing it,. i want this stickied in tutoriol section,.!?

Raisen · 26/10/2008 02:21 PM

No, there, in the .rar are the prx, I need decrypt it because the tools don't do make. I see http://endlessparadigm.com/forum/showthr...p?tid=3397 this tutorial can be done step 2 hexadecimal but I am not leaving. These PRXs are extracted from the e DATA.PSP, that the psardumper does not. What I need decrypt it.

matchung · 26/10/2008 04:28 PM

your files are in gz.. crc error for first file

demonchild · 26/10/2008 06:00 PM

Vegetano1 Wrote:
demonchild Wrote:Get the PSARDUMPER for 5.00 HERE

Move it to /PSP/GAME5xx

Download the 5.00 EBOOT HERE

Move that to the root of your MS.

When done:

1)Disconnect USB, and launch the PSARDUMPER as you would a homebrew, etc.
2)Press [] once its loads.
3)Wait. When it is done, the PSP will exit to the XMB.
4)Re-enable USB Connection.
5)Decrypted files can be found at ms0:/F0 (The F0 folder on the root of your MS)
6)PRXs are going to be in F0/kd, and F0/vsh/module

Have fun.

thanks demonchild i try this too!

you could make a mini tutoriol of this!! or you mind me doing it,. i want this stickied in tutoriol section,.!?

Sure. I'll have it up by tomorrow.

Threaded Mode \| Linear Mode [Help] please decrypt prx
Author	Message