This is it .... Ahh big Props to Mc Cabe for Showing me this. Thanks man , i was faster.

Quote:English readme by: MrTuto_Alek

Installation:

- If you have already a pandora ms, don't do this part. Otherwise,
format an ms using c+d mspformat or any other tool that allows to move
partition to ~250kb from first sector

Remove ms, usb and connect again usb and ms.
Make PSP and PSP/GAME dirs.

- Copy despertar_cementerio to PSP/GAME/

- Download 1.50, 3.40 and 3.71 update eboots and copy them to ms root with
150.PBP, 340.PBP and 371.PBP names.

- Use the app under a cfw with 2.x or 3.x kernel (be sure that kernel is
selected on recovery to the correct one (2.x or 3.x))

- Once finished, u will have msipl.bin on root. If you already have a pandora
ms, you don't have to do this step (ipl doesn't changes lol), otherwise,
use c+d msinst to install ipl on ms; or use dd command from unix, or any
hex-edit program to write on sector 16 on the physical drive.

- Now you can delete 340 and 150 PBP's, as they won't be used more; but 371.PBP
will be used for unbricker, so don't delete it.

- Now you have an universal pandora ms ready to go, and you just need a proper
battery. If you have 1.50 kernel access, use c+d tool. Otherwise, use corly149 tool.

Battery and ms will work on all psp and slims to this date.

How to use :


Well on the slim wee are blind , due to imposibility for the 1.50 to paint the screen ... instead of that the LEDS gonna be used.

2.Ressurect :The options will be 4 :

--» Press X to install 3.71 M33. Once you press X, you will see the orange led lights, this means update 371 its being installed.PBP. Once over, you will see both leds, orange and green flashing intermitentement.This means the program is runing ,once finshed in the Slim will auto reboot, the fat won't ... Then you will see Blue screen , Press O , and you should be on 3.71 M33.

--» Press O for instal 3.71 original. You will see same indicates of life like the previous step.

--» Press [] for nandDump .Once over the Slim will auto shut down.
Make sure you have 33mb (fat)/66mb (slim) free on your memory stick to avoid corruption.The PSP will shut down automatically when done.


--» Press L+R+HOME+start to restore nand-dump.bin
This process is very dangerous, and you should only use it as a last resort.
It is physical restore process (not a logical one), and will try to make
a 100% clone of the dump.
If you are working with a dump that isn't yours, you will get either a brick
or a corrupt idstorage, depending on the firmware.
If, your PSPs NAND has more damaged blocks than the dump being restored,
you may also end up with a brick.

Works for both PSP and PSP Slim.


Good Luck

(This post was last modified: 28/09/2007 03:32 PM by Vegetano1.)

Thanks gsmoke i think i am the only one to use this,.. lol well maybe the first,.. lol

Sweet news

well this is good news for the slim

Mc Cabe Wrote:i was about to post this :(

u big meany, lol

alternate link http://www.sendspace.com/file/tuog5t

MAn i told you post it and was aboout to translate some tutos...

tanks D_A
and Gsmoke for the heads up

nice post of the how to for the slim!  :D

yeah now i can brick my slim then unbrick it and  then send it to sony


wait when you unbrick it does it automaticlly install 3.71 m33?