found a new value,. in MoveTo object >> unknownInt1="0x0"

its basicly XxY curve speed,. say move something over Y and set the value to 0x4 then the movement will slow down when entering end point,. kinda how the xmb icons scroll,. so you won't get a static movement,. but more smoother,. :)

works very nice :) i recommend 0x4 when moving 200 over Y

I am still stuck on editing a rco with rcomage wich was text edited with rcoedit,. but i will add first all animations and edit text after,. ;)

(This post was last modified: 01/06/2010 02:07 PM by Vegetano1.)

I've found the issue but working on a fix now.

Nice find - I'm guessing that's some sort of acceleration constant?

(01/06/2010 06:12 PM)ZiNgA BuRgA Wrote:  I've found the issue but working on a fix now.

That's ok,. i understand your very busy,. cool you found the issue :)

(01/06/2010 06:12 PM)ZiNgA BuRgA Wrote:  Nice find - I'm guessing that's some sort of acceleration constant?

yes,. works very good :)

Edit: its not XxY the second 0 in 0x0 is for both x and y movement,. maybe the first is for slow beginning and second (def/sure it is) is for slow end speed,.

(This post was last modified: 02/06/2010 01:10 AM by Vegetano1.)

(01/06/2010 10:57 PM)Vegetano1 Wrote:  Edit: its not XxY the second 0 in 0x0 is for both x and y movement,. maybe the first is for slow beginning and second (def/sure it is) is for slow end speed,.

"0x" is a prefix for a hex digit, so basically "0x0" means "0" in normal numbers.
It appears to be a mode, so 0 = normal transition, 1 = start slow, 4 = start fast, and beyond 4, doesn't do anything.
Nice find :)

(02/06/2010 02:07 AM)WoobiE Wrote:  Hey Vegetano1, I ran into the same problems as you did as well. What I normally do with editing text in rcoedit is that I leave the text editing till last. Because you edit the text in rcoedit, RCOmage will not dump the .rco's text file completely. I seem to notice that the text file will be incomplete at where you actually edited the text in rcoedit.

Should've told me earlier :)

Can you guys try this build and tell me if it fixes everything?
http://endlessparadigm.com/forum/attachm...p?aid=3957

Thanks!

"Warning: 1 null(s) were stripped from resource 'msgtop_sysconf_console'."
got this warning when dumping an edited rco

compiling worked.

EDIT:
unknownInt1="0x0" also works for rotate,. i guess other's also like rezise,.

(This post was last modified: 02/06/2010 08:16 AM by Vegetano1.)

Yeah, I added that warning.
Thanks.

Just see if WoobiE got his issue fixed.

(This post was last modified: 02/06/2010 06:58 PM by WoobiE.)

Sweeet, thanks.  Updated to v1.1.1.

Changes:
- Add --ini-dir option to allow specifying INI directory for the CLI
- Add version tag 0x97 as a valid PS3 tag (fixes some issues with dumping RCOs from older PS3 firmwares) [thanks to Mr Shizzy for the samples]
- Export animtable tag constants to .ini file; also fix up PS3's special MoveTo animation
- Minor modification to WAV parser - will now skip bytes if header specifies it
- Remove UTF-8 BOMs from dumped XML before the text values - seems to cause issues on some machines (and I don't think it's exactly valid anyway)
- Strip nulls from text (RCO Editor may add them)
- Replace the various "unknownInt1" name with "accelMode" - thanks to Vegetano1 for the find

The BEST thing that I like in Custom Firmware is that it can use custom themes unlike in Official Firmware. If official firmware can use ctf themes I'll switch to Official Firmware.