Threaded Mode | Linear Mode

silver_surfer · 11/06/2009 03:10 PM

Custom Firmware Enabler 3.30 to 5.03 ChickHEN
by Xenogears and Becus25.

What is Custom Firmware Enabler?
- A program that activates the functions of the M33 custom firmware using ChickHEN.

What do I need?
- A PSP (Model 2000 or 3000)
- Download OFW 5.03
- Download 5.03 ChickHEN R2
- Download Custom Firmware Enabler 3.30

3.30 Changes:
- Improved menu options.
- Fixed bug in network update.
- Now you can change version.txt to 5.51.
- Spoof MAC address in XMB.
- Improved the ChikHEN patch system.

Installation:
- Copy the folder to your psp CFWEnabler in X:\PSP\GAME\
Example X:\PSP\GAME\CFWEnabler\EBOOT.PBP

How to use:
Start ChickHEN from the picture section. Then start the homebrew called "CFWLoader 3.30
Then Follow the instructions that follows.

Internet Update:
Time of this release, this option is disabled by lack of a server.
If you have a server and are interested in helping, please contact CFWEnabler@gmail.com

FAQ:
- Can load ISO's? - Yes, yes, you can.
- Will it work with PSP's with TA-088v3 and PSP3000? - Yes
- Can you break my console? - This version has several checks to verify that everything is installed, it is 99.99% safe
- When you turn off the console I have to repeat the procedure? - Yes, you have to repeat it, but after the first time, you don't need flash anything.
- And you can not prevent either procedure? - Could be avoided if wee could do an IPL compatible.
- Is expected to be in the future rectify the current problems? - It is possible, but is not guaranteed anything.
- Does the M33 SDK? - Yes, it works.
- Will plugins work? - Yes, they work.
- Can I install LEDA? - Yes, it works perfectly.

Common Errors:

- When you start the program it automatically goes to the menu --
       It has not been able to reallocate the flash, make sure your version is correct ChickEN.
- I can't run ISO's --
      Make sure that your configuration is correct.
- It created a folder called SVCPlayer Why? --
      You have a plugin that creates the so-called "capture" nothing to do with CFWEnabler.
- Other errors is important to check the plugins that are loaded can that can cause problems.
Also, check the version of ChickHEN (R2) if it is correct.

Change MAC Address:
- just create a spoofmac.txt in the root of the memory stick (ms0:\)
then just type any word you like.

Activate Pops:

To enable compatibility with Native Pops, it is necessary to remove some modules of an Official Firmware.
In this version you can flash any version of the Pops, but only 5.00 is recommended, other versions have not been tested.

  - Required --
     - A PSP that enables homebrew loading.
     - Download OFW 5.00.
     - Download latest PSARdumper

1.-The PsarDumper copy of our report.
2.-copy the firmware to the root of the PSP under the name "EBOOT.PBP"
3.-execute the PsarDumper.
4.-click on "X" and waited.
5.-When finished, enter usb from pc and have a root folder called F0.
6.-look for pops.prx files in the folder and popsman.prx kd (in F0)
7.-Then Copy to Pops folder within CFWEnabler
8.-Run the CFWEnabler.
9.-click on the option "Flash Modules Pops."
10.-then follw the succeding instrunctions.
11.-Done, and you can delete the files from the Memory Stick Pops,
both the EBOOT.PBP and the F0 folder as well as the files in the Pops folder within CFWEnabler Pops.

Warning: You are advised not to change anything to the internal memory or flash0 files because this could lead to a permanent/irrecoverable brick.

Acknowledgments:
- Dark_AleX for the M33 modules.
- PSPStation.org (server)
- GENyUS for his GEN-A Module (in earlier versions)
- Davee for the spoofer plugin

Download Custom Firmware Enabler 3.30

Source: Dark-Alex.org

vinrose67 · 11/06/2009 06:16 PM

when they will release the full hack?

Grey Ghost · 12/06/2009 01:54 AM

is chickHEN that new GEN sofware?

SchmilK · 12/06/2009 08:09 AM

vinrose67 Wrote:when they will release the full hack?

Someday..i think it comes down ot the IPL not being reversable yet?

Threaded Mode \| Linear Mode [Released] Custom Firmware Enabler 3.30 to 5.03 ChickHEN
Author	Message