Quote:You know that big new hard drive you just picked up? Get ready to feel bad. Seagate today is talking up the fact that it has managed to cram one terabit (that's one trillion bits, for the record) into a square inch. That super-dense storage comes thanks to heat-assisted magnetic recording (HAMR) technology, a successor to the perpendicular magnetic recording (PMR) being utilized in current hard drives. The manufacturer sees the technology hitting the market later this decade, "doubl[ing] the storage capacity of today's hard drives" in its wake. Just how many bits are wee talking about here? Let Seagate put things into astronomical perspective: "The bits within a square inch of disk space, at the new milestone, far outnumber stars in the Milky Way, which astronomers put between 200 billion and 400 billion." More info can be found in the press release after the break.

Spoiler:

Seagate Reaches 1 Terabit Per Square Inch Milestone in Hard Drive Storage with New Technology Demonstration

CUPERTINO, Calif.--(BUSINESS WIRE)--Seagate (NASDAQ:STX) has become the first hard drive maker to achieve the milestone storage density of 1 terabit (1 trillion bits) per square inch, producing a demonstration of the technology that promises to double the storage capacity of today's hard drives upon its introduction later this decade and give rise to 3.5-inch hard drives with an extraordinary capacity of up to 60 terabytes over the 10 years that follow. The bits within a square inch of disk space, at the new milestone, far outnumber stars in the Milky Way, which astronomers put between 200 billion and 400 billion.

"The growth of social media, search engines, cloud computing, rich media and other data-hungry applications continues to stoke demand for ever greater storage capacity"

Seagate reached the landmark data density with heat-assisted magnetic recording (HAMR), the next-generation recording technology. The current hard drive technology, Perpendicular Magnetic Recording (PMR), is used to record the spectrum of digitized data – from music, photos, and video stored on home desktop and laptop PCs to business information housed in sprawling data centers – on the spinning platters inside every hard drive. PMR technology was introduced in 2006 to replace longitudinal recording, a method in place since the advent of hard drives for computer storage in 1956, and is expected to reach its capacity limit near 1 terabit per square inch in the next few years.

"The growth of social media, search engines, cloud computing, rich media and other data-hungry applications continues to stoke demand for ever greater storage capacity," said Mark Re, senior vice president of Heads and Media Research and Development at Seagate. "Hard disk drive innovations like HAMR will be a key enabler of the development of even more data-intense applications in the future, extending the ways businesses and consumers worldwide use, manage and store digital content."

Hard drive manufacturers increase areal density and capacity by shrinking a platter's data bits to pack more within each square inch of disk space. They also tighten the data tracks, the concentric circles on the disk's surface that anchor the bits. The key to areal density gains is to do both without disruptions to the bits' magnetization, a phenomenon that can garble data. Using HAMR technology, Seagate has achieved a linear bit density of about 2 million bits per inch, once thought impossible, resulting in a data density of just over 1 trillion bits, or 1 terabit, per square inch – 55 percent higher than today's areal density ceiling of 620 gigabits per square inch.

The maximum capacity of today's 3.5-inch hard drives is 3 terabytes (TB), at about 620 gigabits per square inch, while 2.5-inch drives top out at 750 gigabytes (GB), or roughly 500 gigabits per square inch. The first generation of HAMR drives, at just over 1 terabit per square inch, will likely more than double these capacities – to 6TB for 3.5-inch drives and 2TB for 2.5-inch models. The technology offers a scale of capacity growth never before possible, with a theoretical areal density limit ranging from 5 to 10 terabits per square inch – 30TB to 60TB for 3.5-inch drives and 10TB to 20TB for 2.5-inch drives.

(20/03/2012 04:55 AM)whjms Wrote:  The cost is probably also astronomical.