I recently have updated my PSP 2001 Slim series 5.00m33-6 to 5.50 gend3 and Prometheus-2 and it seems like M33 were Faster to load the ms and the xmb
is there anyway to speed it up?
like m33 were
er... plugins like ultimate vsh menu and cxmb...
You can use the fatMS mod, that will make it a little faster, but still not as fast as M33's Speed Up MS function.
And don't bother with flashing the M33 recovery.prx to GEN. All that will do is let you toggle the ms speed up option in recovery. But it wil not make any speed up difference...
I've attached a chart released with 5.00 M33-6 that shows the speed differences:
can it brick my psp?
i find only for fatties one
not for slim :S
So can you have fatMS mod on a Phat PSP? Also can you use fatMS on 5.00 M33-6 with the speed up mem stick option?
LuanTeles Wrote: [ -> ]can it brick my psp?
i find only for fatties one
not for slim :S
I have attached one that I used on my SLIM.
I guess any time you write to flash, there is a small chance of bricking.
But, with that said, you
should be fine.
OMightyBuggy Wrote: [ -> ]So can you have fatMS mod on a Phat PSP? Also can you use fatMS on 5.00 M33-6 with the speed up mem stick option?
No. DAX has recommended you do not use fatMS mod on m33-6
EDIT: By the way - I realize the attachment says for 5.00, but it works fine on 5.50. ;)
In my Gend3 recovery menu has the option to speed the ms... is it the same of fatsmod 5.00?
Is it?
no it won't do anything.
Slim psps running gen can run the orginal fatsmod patch for 5.00 fine and it works
if you have a fat psp on gen you have to run a special fatsmod patch some guy made for it to work.
im sure Mr. Shizzy coverd this all already.
buy a sandisk gaming card and you will see both firmware are fast :)
ís possible to ise the fastms mod from 5.00m33-6 ? cause it is much faster than the fatms mod from 3.71