Mister Chief Wrote:Are you going to try fix this glitch Zinga?

Didn't even know that existed >_>  Should be easy to fix :P

Have you managed to fix it yet?

ZiNgA BuRgA Wrote:

Mister Chief Wrote:Are you going to try fix this glitch Zinga?

Didn't even know that existed >_>  Should be easy to fix :P

Zinga, when you fix it could you update the attachement in this thread http://endlessparadigm.com/forum/showthr...p?tid=996.

Make sure it has the number of XMB icons set correctly so regular users can use it with no problems.

Thanks for the work.

hi, i used this for 3.30 OE and it works great but on my top 6 icons are in the middle of a black transparent square. im still newish to this but this is what it looks like, could i get some help

(This post was last modified: 17/04/2007 04:42 PM by PS2GT.)

^^You might not have got the alpha right.  Make sure the black area is transparent if you're using 32bit BMPs.  If using 8bit, make sure it's the same black colour (transparency options should be on by default).

ZiNgA BuRgA Wrote:^^You might not have got the alpha right.  Make sure the black area is transparent if you're using 32bit BMPs.  If using 8bit, make sure it's the same black colour (transparency options should be on by default).

oh ok, um how do i do that? i changed the 8 bits to plain black, but i don't know how to do the alpha part, when i used it on 3.03 OE-C i didnt have the problem though. and thanks for helping:D

Alpha has to be modified in Photoshop.

Umm, if it works in 3.03, try this: after extracting all the icons to a folder, delete all the *.mig and *.bmp files, so you only have *.dat files.  Now just replace multiple like normal :P

ZiNgA BuRgA Wrote:Alpha has to be modified in Photoshop.

Umm, if it works in 3.03, try this: after extracting all the icons to a folder, delete all the *.mig and *.bmp files, so you only have *.dat files.  Now just replace multiple like normal :P

ok i will try that, thanks again

*EDIT* hmm, i must be a tard cause it didnt work, i made the icons in ms paint when i made them, should i remake them with photoshop??

(This post was last modified: 17/04/2007 08:38 PM by PS2GT.)

Paint can't control alpha.  If you're using Paint, your best bet is to use 256 colour (8bit).

ZiNgA BuRgA Wrote:Paint can't control alpha.  If you're using Paint, your best bet is to use 256 colour (8bit).

im lost on this, but when i made the icons i used paint and i saved them as 256 and put them in a rco and there was no problem, then today i dug out the rco cause i got the clean rco from, so i extracted all my icons to a folder then i opened the clean rco and then i hit replace all and when it finished i flashed the rco and then i saw like shadows and i replace every shadow and what not with the blank.dat and now i have those black squares. did i do something wrong??? i mean the squares are transparent but its really anoying.