Threaded Mode | Linear Mode

ewan08 · 31/05/2011 09:09 PM

NotOnlyEyes Wrote:A CURIOSITY IN MATHEMATICS:

I just tested both installations on my PSP-2004 ta085v1 with excellent results.I installed before the CFW 6.39 ME-3, this has the possibility to load the Original FW 6.39 by pressing the HOME button in the startup of the PSP ...Loaded Original FW 6.39 I booted the installation 6.39 PRO-B6 , this install different files from ME-3...repeat installation 6.30 ME-3 for fix...In doing so I have both the flash0 of CFWs...I turn on the PSP with the HOME button pressed load FW 6.39, hence I use FastRecovery PRO-B6 that loads its files from flash0 ... or I turn off and turn on normally so I 6.39 ME-3 in me PSP, but those who use the HEN could use both versions of the launcher and fastrecovery after the double installation...ALL EXCEPT the PSP GO 05g... by Notonlyeyes

Sauce

fajrlodhi · 01/06/2011 06:40 AM

So this does work?
I'm a try it out:)

shakan09 · 01/06/2011 09:01 AM

i figured this would be possible

flofrucht · 01/06/2011 10:47 AM

This isn't his CFW^^ Just a simple trick^^

DeathAngel74 · 01/06/2011 11:45 AM

It DOES work, I just tried it. But it's 3 fw's not 2(OFW 6.39/6.39PRO-B6/6.39ME-3). It's kind of cool to be able to triple boot cfw/ofw on one slim psp. Thanks for this information.

ewan08 · 02/06/2011 05:16 AM

I don't really get this Trick ho does this thing really work??
Could someone please explain this in hte other way(Like noobish way)...

St0rMaGe · 02/06/2011 05:37 AM

Hey I've done this before! it also works with 6.35 me and 6.35 pro

DeathAngel74 · 02/06/2011 08:03 AM

ewan08, think of it as dual booting linux and windows, using lets say....using default windows boot loader. first you install 6.39me-4, then hold home when booting the psp. once you are in ofw, run the 6.39 pro-b6 installer, wait for it to do its thing. after that run pro fast recovery. pro-b6 will install different files in the flash0, so to correct this, you need to install 6.39me-4 again. now you're all done and you have successfully installed 6.39me-4 and 6.39pro-b6 into your flash0.

to boot into official firmware, hold HOME while powering up

to boot into 6.39me-4, power up the psp normally

to boot into 6.39 pro-b6, boot up your psp and run the pro b-6 fast recovery

fajrlodhi · 02/06/2011 08:07 AM

I also tried it, works like a charM:)

Notonlyeyes · 02/06/2011 08:16 AM

Thanks...by Notonlyeyes

Threaded Mode \| Linear Mode Dual CFW by Notonlyeyes?
Author	Message