Threaded Mode | Linear Mode

ZiNgA BuRgA · 30/10/2010 08:53 PM

Was trying to get Lost Planet 2 to work (dl'd a 4.3GB rip, and doesn't run here) and tried getting the latest Catalyst 10.10 drivers to see if that would fix the problem.
Obviously didn't, but anyway, it seems to have changed the colour balance on my screen, and it's now got a slight red/pink shade over it.
The Catalyst Control Centre (CCC) doesn't have abnormal colour settings, apart from the CCC going whacko with its buttons (disables and enables them every second), so I can't seem to change the colour balance.

So only conclusion: clearly my video card has fallen in love.

Assassinator · 30/10/2010 09:06 PM

Don't try to change color balance in Catalyst. Do it directly on your monitor (should be buttons on your monitor which would let you do that).

Anyway, I haven't changed drivers in like forever.

Kana · 31/10/2010 06:11 AM

my comp and your monitur is definitely screwing each other. tell him to use protection, anything but KAV

Vegetano1 · 31/10/2010 01:39 PM

i love me display,. but i am not turning red/pinkish,. Hmmm

SkyDX · 31/10/2010 03:50 PM

Bug in Catalyst 10.10 the default color temperature is accidentally set to 6600k instead 6500k as it was before, just switch it back^^

ProperBritish · 31/10/2010 04:52 PM

(31/10/2010 06:11 AM)Kana Wrote: my comp and your monitur is definitely screwing each other. tell him to use protection, anything but KAV

I'll turn on HDCP, should do the trick

ZiNgA BuRgA · 31/10/2010 05:44 PM

(31/10/2010 03:50 PM)SkyDX Wrote: Bug in Catalyst 10.10 the default color temperature is accidentally set to 6600k instead 6500k as it was before, just switch it back^^

Iz zat in ze colure sekshion?

SkyDX · 31/10/2010 05:54 PM

(31/10/2010 05:44 PM)ZiNgA BuRgA Wrote:
(31/10/2010 03:50 PM)SkyDX Wrote: Bug in Catalyst 10.10 the default color temperature is accidentally set to 6600k instead 6500k as it was before, just switch it back^^
Iz zat in ze colure sekshion?

In the other one:

Go to Desktop and Displays -» then click the smaller black arrow at the bottom -» select configure -» go to the color tab

ZiNgA BuRgA · 31/10/2010 06:19 PM

Thankz, I shalt check it when I get home.

Edit: worked, thanks. Option isn't in an obvious place >_>

Threaded Mode \| Linear Mode My display has fallen in love
Author	Message