Endless Paradigm

Full Version: Pandoras battery help
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
Ok so i was making a pandoras battery but this comes up when i type in the commands... any ideas? I would be very grateful for any help!!

Microsoft Windows [Version 6.0.6000]
Copyright © 2006 Microsoft Corporation.  All rights reserved.

C:\Users\Gabriel>cd c:\

c:\>cd msinst

c:\msinst>msinst.exe K msipl.bin
PSP MS IPL Installer
Load IPL code msipl.bin
241664 bytes(59 block) readed

Target DRIVE is 1
Check partation Sector
Cannot open device \\.\PHYSICALDRIVE1
Can't read partation sector
Spyro. Wrote:Ok so i was making a pandoras battery but this comes up when i type in the commands... any ideas? I would be very grateful for any help!!

Microsoft Windows [Version 6.0.6000]
Copyright © 2006 Microsoft Corporation.  All rights reserved.

C:\Users\Gabriel>cd c:\

c:\>cd msinst

c:\msinst>msinst.exe K msipl.bin
PSP MS IPL Installer
Load IPL code msipl.bin
241664 bytes(59 block) readed

Target DRIVE is 1
Check partation Sector
Cannot open device \\.\PHYSICALDRIVE1
Can't read partation sector

You should use the easy gui!!

http://forums.maxconsole.net/showthread.php?t=76477
Ok, i used that but the battery don't work still, just acts the same way as it was when it was bricked :(
Spyro. Wrote:Ok, i used that but the battery don't work still, just acts the same way as it was when it was bricked :(

If you try and make battery again what id daoes the battery have!?

By the way here is a other easy gui,.. but have not used it meself,.!

EDIT that second gui was no good,. lol sorry no link
how does one create the battery in the first place? I'm kinds of back to where you have to format the PSP
Syfe Wrote:how does one create the battery in the first place? I'm kinds of back to where you have to format the PSP

Check this specialy  the easy gui part,.
http://www.psp-hacks.com/forums/viewtopic.php?id=112065

easy gui:
http://www.psp-hacks.com/forums/viewtopic.php?id=107553
i made a battery but i lost the memory card i tried making another with a program someone gave me on here but it didn't work
okay battery was made... but it fails to install firmware to the psp.
It sounds you created the battery successfully but not the memory stick.
Sypro, do you use Vista?
Try using a different battery, (is your battery compatible) and what kind of memory stick are you using?
Pages: 1 2 3
Reference URL's