Endless Paradigm

Because some guys asked me about a TUT how to install 6.20 PRO-B5 Permanent, I made one.

Works on PSP 1000, 2000, 3000, 4000 or PSPgo!

But your PSP Unit must be 5g or lower!

I tested it by myself on a PSPgo ;=).

For this, you will need:
- PSP 1000, 2000, 3000, 4000 or PSPgo
-6.20 PRO-B5
-Official PSP Firmware 6.20
-6.35/6.31 to 6.20 Downgrader if you aren't on Firmware 6.20
-PSP Module Checker 3.0 to check your PSP unit

Tutorial

1.Extract the downloaded archive.

[Image: sinttuloqm.png]

2.Copy the 620PRO_Permanent, PROUPDATE and the FastRecovery folder to PSP/GAME.

3.Launch the Update 6.20 PRO-B5.

4.Press X to install the 6.20 PRO-B5 CFW.

5.Your PSP is rebooting...

6.Launch the Update 6.20PRO Permanent..
[Image: xmbn.png]

7.Press X (now there's a warning, ignore it, but you can backup the file if you want for safety reasons)
[Image: installz.png]

and then O to install the 6.20 PRO-B5 CFW Permanent.
[Image: isntall2.png]

The secure way:

Spoiler:

8. Congrats...now you're on 6.20 PRO-B5 Permanent, enjoy it ;).

Uninstallation:

1.Run the 6.20 PRO-B5 Permanent Installer again.

2.Press X to uninstall the Permanent Patch.

[Image: 37888348501691634817378.png]

But the vshorig.prx must exist at ms0:/ or ef0:/ vshorig.prx.

Problem-solving:

There's a Recovery combo to uninstall it:
While starting your PSP hold ◯ + x + START + SELECT to uninstall the patch!

Note: If you want to skip the Sony-Logo at startup, hold R while starting the PSP, now you're in the Recovery Menu.

Go to Configuration and enable Skip Sony Logo ;)

Note2: While starting your PSP and holding SELECT you are on OFW 6.20 again ;):

It took me 1 hour to write and test it, it isn't really difficult to say just thanks :).

[Image: snap022c.png]

-flofrucht

cheers flo, your the man. Always keeping us up to date.

Edit: works great on my old psp 1000

what's a "5G" ?

ive got a psp1000 so that's irrelevant to me. . but still :p

thanks for the guide flo! 2thumbs

Great guide flo Madwin

If I could offer a correction:
Step #6 is not necessary.  After your PSP reboots, it is already in HEN, so no need to launch fast recovery.

Also, I would add into the tutorial details on how people can tell what motherboard they have.  This way people aren't bricking their PSP not knowing if they have a compatible unit.   The easiest way to do that is to launch fast recovery and then turn on mac spoofing, and then check in system settings.

I installed 6.20 PRO permanent and I am absolutely thrilled !   Yay

Thanks for always keeping us up with the latest news flo :D

Cool, thanks for the tut.
Gonna install this, hope I can get my save files to work on this.

Great work as always man Madwin

What plug-ins are compatible in 6.20 pro-before?

i just downgraded from 6.35 PRO-B 4 to this,,, then my dayviewer and hud cannot be used anymore
does anyone knows hud and dayviewer which compatible with 6.20 PRO-B 4?
--------------------------------------------------------------------------
nevermind,,, just found them on wololo

my new problem : i don't seem able to get version.txt to work on this firmware. did anyone tried it yet?

You shoot link up to this>> http://endlessparadigm.com/forum/showthr...?tid=26363
so people can be sure whot PSP model they have. (dunno if its signed, for people with ofw)

by the way i had thought i moved this thread to tutorial section?

thanks for the tut flo

Damn I want a go now :x

flofrucht

Grey Ghost

boogschd

Mr. Shizzy

xBu

eKusoshisut0

jewyew

eznoir

Vegetano1

Cirehpsa