Because some guys asked me about a TUT how to install 6.20 TN-D Permanent Patch on every PSP, I made one.
Works on PSP 1000, 2000v2
BRICK RISK!! 2000v3, 3000, 4000 or PSPgo!
DO THIS AT YOUR OWN RISK, IF YOUR BRICK YOUR PSP GO IT WILL BE DEAD.
I tested it by myself on a PSPgo with 6.20TN-D.
For this, you will need:
- PSP 1000, 2000, 3000, 4000 or PSPgo
-
6.20 TN-D
-
6.20 TN-D Permanent Patch Pack
Tutorial
1.Copy the
620TND_PPATCH folder to ms0:/ or ef0: /PSP / GAME.
2.Disable
[Protect Flash0] in the VSH Menu (Press "SELECT")
![[Image: 6-20-tn-hes3la.jpg]](http://u77.img-up.net/6-20-tn-hes3la.jpg)
3.Launch
6.20TN-D Permanent Patch.
![[Image: 2011030918f1we.jpg]](http://z99.img-up.net/2011030918f1we.jpg)
4.Press
x to continue.
![[Image: 20110309182y4p.jpg]](http://l51.img-up.net/20110309182y4p.jpg)
5.The original
flash0: / vsh / module / vshmain.prx was now backed up to
ms0:/ or ef0: / vshorig.prx.
![[Image: 20110309187xv2.jpg]](http://o15.img-up.net/20110309187xv2.jpg)
Keep this file for safety reasons, if you'll have a brick you can use that file to recover your psp!
6.Press
x again to launch the 6.20 TN-D Permanent Patch in Test mode.
7.Launch the installer again, press
x and then
o.
8.The patch was now completely installed and the
flash0: / vsh / module / vshorig.prx was renamed to [B]vshmain.prx!
Now you stay permanently on 6.20 TN-D!
Deinstallation:
Launch the installer again and deinstall the Patch.
Problem-solving:
There are two recovery combinations:
-while starting the PSP hold
R1, this will disable all plugins and set the settings to standard!
-while starting the PSP hold
o + x + SELECT + START, this will restore the vshorig.prx that you have backed up!
IF YOU LIKED IT, REP ME ;=)
-flofrucht
Nice tut but you should add that people should do this add there own risk,.. just because you tested this on a PSP-Go doesn't mean other people can't brick there PSP-Go,.
there are reports people got bricked PSP-Go's!!
i for one would nvr try this,. knowing there is a possibility to brick my PSP-Go ;)
if you have a brick you have a brick,.... your PSP-Go will be dead,...
Added, but there's not really a chance of a brick.
Problem-solving :)
-flofrucht
flofrucht Wrote: [ -> ]Added, but there's not really a chance of a brick.
Problem-solving :)
-flofrucht
Problem solving won't do you any good,. if you bricked you Go,.... brick=brick
i am happy 620TN is a HEN,. its a save way to run a cfw without touching the flash0,.. and i don't mind running the signed eboot once in awhile,..
Yeah, I'm too wuss to try this out; besides, right now I'm preferring 6.35 HEN over TN's ATM
Vegetano1 Wrote: [ -> ]flofrucht Wrote: [ -> ]Added, but there's not really a chance of a brick.
Problem-solving :)
-flofrucht
Problem solving won't do you any good,. if you bricked you Go,.... brick=brick
i am happy 620TN is a HEN,. its a save way to run a cfw without touching the flash0,.. and i don't mind running the signed eboot once in awhile,..
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ FINALLY someone who understands :) im not gonna try this on my 3000 4g when clicking the hen takes 3 secs to reboot. more and more people are getting bricks.
remember they said to try this on a 1000 or 2000v2s. hmmm wonder why.
motherboards on different PSPs have different modules.
Code:
PSP-1000
Tachyon = 0x00140000 Baryon = 0x00030600 Pommel = 103 TA-079 v1 1g Phat 1.0
Tachyon = 0x00200000 Baryon = 0x00030600 Pommel = 103 TA-079 v2 1g Phat 1.1
Tachyon = 0x00200000 Baryon = 0x00040600 Pommel = 103 TA-079 v3 1g Phat 1.2
Tachyon = 0x00300000 Baryon = 0x00040600 Pommel = 103/104 TA-081 1g Phat 2.0
Tachyon = 0x00400000 Baryon = 0x00114000 Pommel = 112 TA-082 1g Phat 3.0
Tachyon = 0x00400000 Baryon = 0x00121000 Pommel = 112 TA-086 1g Phat 4.0
PSP-2000
Tachyon = 0x00500000 Baryon = 0x0022B200 Pommel = 123 TA-085 v1 2g Slim 1.0
Tachyon = 0x00500000 Baryon = 0x00234000 Pommel = 123 TA-085 v2 2g Slim 1.1
Tachyon = 0x00500000 Baryon = 0x00243000 Pommel = 123 TA-088 v1 2g Slim 2.0
Tachyon = 0x00500000 Baryon = 0x00243000 Pommel = 123 TA-088 v2 2g Slim 2.1
Tachyon = 0x00600000 Baryon = 0x00243000 Pommel = 123 TA-088 v3 2g Slim 2.2
Tachyon = 0x00500000 Baryon = 0x00243000 Pommel = 132 TA-090 v1 2g Slim 3.0
PSP-3000
Tachyon = 0x00600000 Baryon = 0x00263100 Pommel = 132/133 TA-090 v2 3g Brite 1.0
Tachyon = 0x00600000 Baryon = 0x00285000 Pommel = 133 TA-092 3g Brite 2.0
Tachyon = 0x00810000 Baryon = 0x002C4000 Pommel = 141/143 TA-093 4g Brite 3.0
Tachyon = 0x00810000 Baryon = 0x002e4000 Pommel = TA-0 6g Brite X.0
Tachyon = 0x00 Baryon = 0x00 Pommel = TA-0 7g Brite X.0
Tachyon = 0x00720000 Baryon = 0x00304000 Pommel = 133 TA-095 9g Brite X.0
PSP-N1000
Tachyon = 0x00720000 Baryon = 0x00304000 Pommel = 133 TA-091 5g Go 1.0
Tachyon = 0x00800000 Baryon = 0x002A Pommel = TA-094
|
im getting annoyed with this now... But you've been warned. A Brick is a Brick.
Also if it does work, your psp will not function normally but it wouldn't be visible to you.
DeMeTriC Wrote: [ -> ]Vegetano1 Wrote: [ -> ]flofrucht Wrote: [ -> ]Added, but there's not really a chance of a brick.
Problem-solving :)
-flofrucht
Problem solving won't do you any good,. if you bricked you Go,.... brick=brick
i am happy 620TN is a HEN,. its a save way to run a cfw without touching the flash0,.. and i don't mind running the signed eboot once in awhile,..
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ FINALLY someone who understands :) im not gonna try this on my 3000 4g when clicking the hen takes 3 secs to reboot. more and more people are getting bricks.
remember they said to try this on a 1000 or 2000v2s. hmmm wonder why.
motherboards on different PSPs have different modules.
Code:
PSP-1000
Tachyon = 0x00140000 Baryon = 0x00030600 Pommel = 103 TA-079 v1 1g Phat 1.0
Tachyon = 0x00200000 Baryon = 0x00030600 Pommel = 103 TA-079 v2 1g Phat 1.1
Tachyon = 0x00200000 Baryon = 0x00040600 Pommel = 103 TA-079 v3 1g Phat 1.2
Tachyon = 0x00300000 Baryon = 0x00040600 Pommel = 103/104 TA-081 1g Phat 2.0
Tachyon = 0x00400000 Baryon = 0x00114000 Pommel = 112 TA-082 1g Phat 3.0
Tachyon = 0x00400000 Baryon = 0x00121000 Pommel = 112 TA-086 1g Phat 4.0
PSP-2000
Tachyon = 0x00500000 Baryon = 0x0022B200 Pommel = 123 TA-085 v1 2g Slim 1.0
Tachyon = 0x00500000 Baryon = 0x00234000 Pommel = 123 TA-085 v2 2g Slim 1.1
Tachyon = 0x00500000 Baryon = 0x00243000 Pommel = 123 TA-088 v1 2g Slim 2.0
Tachyon = 0x00500000 Baryon = 0x00243000 Pommel = 123 TA-088 v2 2g Slim 2.1
Tachyon = 0x00600000 Baryon = 0x00243000 Pommel = 123 TA-088 v3 2g Slim 2.2
Tachyon = 0x00500000 Baryon = 0x00243000 Pommel = 132 TA-090 v1 2g Slim 3.0
PSP-3000
Tachyon = 0x00600000 Baryon = 0x00263100 Pommel = 132/133 TA-090 v2 3g Brite 1.0
Tachyon = 0x00600000 Baryon = 0x00285000 Pommel = 133 TA-092 3g Brite 2.0
Tachyon = 0x00810000 Baryon = 0x002C4000 Pommel = 141/143 TA-093 4g Brite 3.0
Tachyon = 0x00810000 Baryon = 0x002e4000 Pommel = TA-0 6g Brite X.0
Tachyon = 0x00 Baryon = 0x00 Pommel = TA-0 7g Brite X.0
Tachyon = 0x00720000 Baryon = 0x00304000 Pommel = 133 TA-095 9g Brite X.0
PSP-N1000
Tachyon = 0x00720000 Baryon = 0x00304000 Pommel = 133 TA-091 5g Go 1.0
Tachyon = 0x00800000 Baryon = 0x002A Pommel = TA-094
|
im getting annoyed with this now... But you've been warned. A Brick is a Brick.
Also if it does work, your psp will not function normally but it wouldn't be visible to you.
I have a psp 3004 4G Vibrant blue that work for me you can test it with test mode:D
well, this is working on my PSP 3006 3g
i haven't touch my PSP GO for a while! is this means that you will stay on 6.20 TN-D Permanent even you take off battery?
