Endless Paradigm

playjun Wrote: [ -> ]i want to test it...but i don't have pandora battery..T_T..
so my question is ,can I use  hellscat 1.65 to back again to 5.50 ?..THANKS

you want to just make a pandora battery? ill help you out, just remember that if your harmodding it, you need the timemachine ipl if you want to boot normally.
EDIT: Just think of how invinceible you will feel with pandora by your side

thanks dark mirage... i know to hardmod battery too..
but i have a fake battery..... i just want ask if hellscat recovery flasher 1.65 works on this CFW?
thanks by the way

If 6.35 is at Beta 12 you can probably think of this as an Alpha release (as in prior to Beta).

Unfortunately, there hasn't been any incentive for me to update from 5.00 M33-6. None whatsoever. The comic reader and sensme channels are a grade-A POS and by using ISO Tool, 6.xx games work on 5.xx firmware. POPSLoader is working splendidly and there's maximum compatibility with plugins and homebrew. I'm what you would call a "happy camper".

Even so, I'm sure at some point I'll have to update if I want to play a certain game, so I'm glad at least someone is working on a 6.xx "permanent" custom firmware.

playjun Wrote: [ -> ]i just want ask if hellscat recovery flasher 1.65 works on this CFW?
thanks by the way

Yes, it will.

I just downgraded from 6.37 ME to 5.50 GEN
using Hellcats Recovery Flasher.

ok.. i already test it,,,
some games are not working..umd dead....
cwcheat working..multi plugins....joysens....ok..
but i back to 5.50 prome-4 again..thanks again

flofrucht Wrote: [ -> ]

neur0n released CFW 6.37 ME (Minimum Edition) for PSP2000.

Quote:CFW 6.37 Minimum Edition for PSP2000 by neur0n

-- What is this?--
This is CFW work on PSP2000.

The degree of stability is still unknown.
Please test it on your own and refer to different people's test reports.

--How to Install--
First, you need to install CFW or HEN(ex. 5.00M33 , 6.20TN , 6.35PRO) in your PSP.

1. copy UPDATE folder at ms0/PSP/GAME/.
2. Put 6.37 official update at ms0:/PSP/GAME/UPDATE/637.PBP .
3. Run installer from xmb.


-- features --
Hold R trigger and turn on the psp, you can enter recovery menu.
Hold Home button and turn on the psp, you can Boot OFW !!!!!!!

Add OPNSSMP option. Now you can run ISO without decrypt EBOOT.bin ,if ISO's required FW is lower than 6.37.
You can set this option at "RecoveryMenu » Advanced » Advanced Config » Excute OPNSSMP.bin" .

--History--
v1
-- first Release

Source

http://www.megaupload.com/?d=HQC4U6SK

Note: I'm always writing News for EP,I would be happy for some reputation.

this is the link for the (OFW6.37) :)
http://downloads.exophase.com/724/psp-firmware-637/

Anybody try this out on the PSP 1000?

No,because it's only for psp2000.

You will brick your PSP.