Endless Paradigm

Materials:
-Transistor 2N2222A (available on radio shack or electronics store)
-0603 smd led's (ebay),(test them with a multimeter)
-kynar wire 30 gauge (radio shack or electronics store)
-soldering iron 15-20 watts and "skill" (radio shack or electronics store)
-Glue gun or tape (any crafting shop,even walmart)
-Drill (really small)
If you don't have "SOLDERING" exp. do some practice 1srt in any old board,chip or cable.Use soldering "FLUX" always for top results.
If you use red leds 2.6v put a 100ohms resistor between motherboard and 1srt led,if have installed a switch between switch and 1srt led.Do this just in this case.
-I make this tuto from Folklord36 & Lordnico more easy to understand and user friendly hope help you out.


-Use 2 or 4 led's.Add this to others led's.
Clear UMD door cost $3 bucks aprox or the entire housing cost $20-$25 bucks on EBAY.
Picture download:http://www.megaupload.com/?d=GVH4OK0G

Heres my PSPslim using this tutorial:




+ UMD door with 2 LEDs

Oooohhhh love the datail put into this!

god that sort of stuff is trippy! i love it nice work!

Great tutorial! This should be among the important threads ..........too bad I do not know anything when it comes to modding

Could it be done on PSP 3000??

did you just rip pictures from an acidmods tutorial and make it your own

im on AM but i rarely ever go

have they actually made anything new recently, this mod is olllllllllllllllllllld

Yeah, this mod is really old.

* Joom misses the SM days. ;___;

Joomla12 Wrote: [ -> ]Yeah, this mod is really old.

* Joomla12 misses the SM days. ;___;

so do i jooms, so do i ;_;

* ProperBritish tips his hat

I done this to my psp 1000 with red leds like two years ago...

of course is really old but in this site don't have nothing like this yet so I post it and like said before:
I make this tuto from Folklord36 & Lordnico "more easy to understand and user friendly"
so anyone can make it.
This is not for fat,for fat u need the LM amplifier
Yes this work with 3000