30/06/2009, 08:19 AM
MyCustomCF Revision 2
by lepoete/Zer01ne
# MyCustomCF (MyCustomCustomFirmware) By Zer01ne #
##################################################
*CF = (CustomFirmware)
This Homebrew allows the use of two different *CF
with a press of a button. The Triangle and Square button of your PSP.
MyCustomCF currently uses some of the two modules of the *following CF:
5.00 M33-6/5.03 GEN-A for HEN (Full).
MyCustomCF runs under the 5.0X Kernel (Firmware 5.00, 5.02).
Supported Firmware: CFW 5.00 M33/CFW 5.02 GEN-A
This application touches your Flash0 so there is a minimal possibility of a brick.
Version 1 Test Révision 2
-Now runs under 5.02 Kernel
-Redirecting of file flash0:/vsh/etc/version.txt to the Memory Stick in ms0:/myccf/version.txt
-Patch for the PSStore (Up to 5.51 Firmware)
-Patch for the Network Update (MyCCF Updater)
-MyCustomCF configurable depuis l'installeur (Redirecting version.txt, Patch Network Update, Boot Settings)
Version 1 Test
-Run under the 5.00 Kernel
-Startup on 5.00 M33-6, 5.03 GEN-A
-Redirecting vshctrl.prx (M33, GEN), satelite.prx (M33, GEN), recovery (GEN) to the Memory Stick
-Known Bugs
-Redirecting of file flash0:/vsh/etc/version.txt to the Memory Stick in ms0:/myccf/version.txt
only working on 5.00 M33-6 (work once on ???)
-HomeBrew List and iso with or whitout GameCategories (Plugins, GEN Option) will not display
-On 5.00 M33-6 when booting on Custom Firmware GEN-A the version is 5.03 GEN-F instead of 5.03 GEN-A
-On 5.02 GEN-A when booting on Custom Firmware M33-6 the version is 5.00 M33 instead of 5.00 M33-6
How to use:
At startup press Triangle to start CF 5.03 GEN-A (Full)
and Square to start CF 5.00 M33-6.
It will be saved in a configuration file and will overwrite your previous setting.
If you leave a Game/Homebrew/ISO and you press one of these buttons it will boot
the CF associated with it.
Credits:
-silver_surfer for the english translation
-Dark_Alex-modules for 5.00 M33 CF-6
-MaGiXieN, Miriam and GENyUS for modules FC 5.03 GEN-A
Download MyCustomCF Revision 2
Source
by lepoete/Zer01ne
# MyCustomCF (MyCustomCustomFirmware) By Zer01ne #
##################################################
*CF = (CustomFirmware)
This Homebrew allows the use of two different *CF
with a press of a button. The Triangle and Square button of your PSP.
MyCustomCF currently uses some of the two modules of the *following CF:
5.00 M33-6/5.03 GEN-A for HEN (Full).
MyCustomCF runs under the 5.0X Kernel (Firmware 5.00, 5.02).
Supported Firmware: CFW 5.00 M33/CFW 5.02 GEN-A
This application touches your Flash0 so there is a minimal possibility of a brick.
Version 1 Test Révision 2
-Now runs under 5.02 Kernel
-Redirecting of file flash0:/vsh/etc/version.txt to the Memory Stick in ms0:/myccf/version.txt
-Patch for the PSStore (Up to 5.51 Firmware)
-Patch for the Network Update (MyCCF Updater)
-MyCustomCF configurable depuis l'installeur (Redirecting version.txt, Patch Network Update, Boot Settings)
Version 1 Test
-Run under the 5.00 Kernel
-Startup on 5.00 M33-6, 5.03 GEN-A
-Redirecting vshctrl.prx (M33, GEN), satelite.prx (M33, GEN), recovery (GEN) to the Memory Stick
-Known Bugs
-Redirecting of file flash0:/vsh/etc/version.txt to the Memory Stick in ms0:/myccf/version.txt
only working on 5.00 M33-6 (work once on ???)
-HomeBrew List and iso with or whitout GameCategories (Plugins, GEN Option) will not display
-On 5.00 M33-6 when booting on Custom Firmware GEN-A the version is 5.03 GEN-F instead of 5.03 GEN-A
-On 5.02 GEN-A when booting on Custom Firmware M33-6 the version is 5.00 M33 instead of 5.00 M33-6
How to use:
At startup press Triangle to start CF 5.03 GEN-A (Full)
and Square to start CF 5.00 M33-6.
It will be saved in a configuration file and will overwrite your previous setting.
If you leave a Game/Homebrew/ISO and you press one of these buttons it will boot
the CF associated with it.
Credits:
-silver_surfer for the english translation
-Dark_Alex-modules for 5.00 M33 CF-6
-MaGiXieN, Miriam and GENyUS for modules FC 5.03 GEN-A
Download MyCustomCF Revision 2
Source