Endless Paradigm

Full Version: [NEWS] TA-90 v3: A new motherboard for PSP-3000?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
TA-90 v3: A new motherboard for PSP-3000?
Author: MaGiXieN

Quote:Flasher fell on what appeared to be a new motherboard for PSP-3000: A TA-90 v3. Read on to discover.

Flasher therefore found the motherboard by removing a PSP for moderation.
It was his eye that drew on the fact that the card was not the same as others.
In any case, there is a small detail changes.

But before showing the new card, needed a little reminder:

     * Motherboard PSP-1000:

           o All motherboards PSP-1000 can pass cutom Firmware


     * Motherboard psp 2000:

           o motherboards which are capable of supporting a custom firmware is the TA-085, TA-085 v2, TA-88 and TA-088 v2.
These cards can no longer stand the firmware 1.50 and thus are fair in Custom Firmware with a pandora kit.
           o The two motherboards are the cards maudites PSP-2000: TA-088 v3 and TA-090 v1 can not be flash to install a
custom firmware. Recently, thanks to the Custom Firmware extender it is possible to run a Custom Firmware on a slim via Davee's chickHEN.

     * Motherboard psp 3000:

           No. TA-090 v2: This is the first model to have equipped the PSP-3000. Inflashable and yet
no online utility allows to launch a custom firmware on these motherboards. For the moment only the
5.02HEN-A PSPGEN exists but can not be put online yet. The CFE may be improved in the coming days
to support the PSP-3000. (marque 1 photos)

           No. TA-090 v3: This motherboard has been "discovered" by Flash and it gave us several
photos and a video that the more explicit photos. So new model or just a minor change, wee know
nothing more yet. (2 marks on the pictures)

[Image: dsc00048a_09028001E000320702.jpg]
TA-090 v2

[Image: dsc00080e_09028001E000320703.jpg]
TA-090 v3 ????


and now the video:

http://www.youtube.com/watch?v=CguSafyL96U

Is this really a new motherboard or a simple change of marking, however,
neither one nor the other are permeable to a custom firmware ...

Source
Note: This is a google translation.
Isn't it that TA090v1 on slims can installed with CFW?
Reference URL's